DOWNLOAD Panasonic DLS6C Service Manual ↓ Size: 7.34 MB | Pages: 39 in PDF or view online for FREE

Model
DLS6C
Pages
39
Size
7.34 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio / MECHANISM UNIT
File
dls6c.pdf
Date

Panasonic DLS6C Service Manual ▷ View online

3 Precaution of Laser Diode
CAUTION :
This product utilizes a laser diode with the unit turned "on", invisible laser radiation is emitted from the pickup lens.
Wavelength: 655 nm (DVD)/785 nm (CD)
Maximum output radiation power from pickup: 100 µW/VDE
Laser radiation from the pickup unit is safety level, but be sure the followings:
 1. Do not disassemble the pickup unit, since radiation from exposed laser diode is dangerous.
 2. Do not adjust the variable resistor on the pickup unit. It was already adjusted.
 3. Do not look at the focus lens using optical instruments.
 4. Recommend not to look at pickup lens for a long time.
ACHTUNG :
Dieses Produkt enthält eine Laserdiode. Im eingeschalteten Zustand wird unsichtbare Laserstrahlung von der
Lasereinheitadgestrahit.
Wellenlänge: 655 nm (DVD)/785 nm (CD)
Maximale Strahlungsleistung der Lasereinhelt: 100 µW/VDE
Die strahlungan der Lasereinheit ist ungefährlich, wenn folgende Punkte beachtet werden:
 1. Die Lasereinheit nicht zerlegen, da die Strahlung an der freigelegten Laserdiode gefährlich ist.
 2. Den werksseitig justierten Einstellregler der Lasereinheit nicht verstellen.
 3. Nicht mit optischen Instrumenten in die Fokussierlinse blicken.
 4. Nicht über längere Zeit in die Fokussierlinse blicken.
4
DLS6C
4 About Lead Free Solder (PbF)
4.1. Service caution based on legal restrictions
4.1.1. General description about Lead Free Solder (PbF)
The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this
equipment in considering the globally environmental conservation.
The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin
(Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86°F) more than that
of the normal solder.
Definition of PCB Lead Free Solder being used
The letter of “PbF” is printed either foil side or components side on the PCB using the lead free solder.
(See right figure)
Service caution for repair work using Lead Free Solder (PbF)
  " The lead free solder has to be used when repairing the equipment for which the lead free solder is used.
(Definition: The letter of “PbF” is printed on the PCB using the lead free solder.)
  " To put lead free solder, it should be well molten and mixed with the original lead free solder.
  " Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC.
  " Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt
the lead free solder.
  " Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30
degrees C (662±86°F).
Recommended Lead Free Solder (Service Parts Route.)
  " The following 3 types of lead free solder are available through the service parts route.
RFKZ03D01K-----------(0.3mm 100g Reel)
RFKZ06D01K-----------(0.6mm 100g Reel)
RFKZ10D01K-----------(1.0mm 100g Reel)
Note
* Ingredient: tin (Sn), 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%
5
DLS6C
5 Handling Precautions for Traverse Unit
The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be
taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit.
5.1. Cautions to Be Taken in Handling the Optical Pickup Unit
The laser diode in the optical pickup unit may be damaged due to electrostatic discharge generating from clothes or human body.
Special care must be taken avoid caution to electrostatic discharge damage when servicing the laser diode.
 1. Do not give a considerable shock to the optical pickup unit as it has an extremely high-precise structure.
 2. To prevent the laser diode from the electrostatic discharge damage, the flexible cable of the optical pickup unit removed should
be short-circuited with a short pin or a clip (Figure 1).
6
DLS6C
5.2. Grounding for electrostatic breakdown prevention
Some devices such as the CD/DVD player use the optical pickup (laser diode) and the optical pickup will be damaged by static
electricity in the working environment. Proceed servicing works under the working environment where grounding works is
completed.
5.2.1. Worktable grounding
 1. Put a conductive material (sheet) or iron sheet on the area where the optical pickup is placed, and ground the sheet (Figure 2).
5.2.2. Human body grounding
 1. Use the anti-static wrist strap to discharge the static electricity form your body (Figure 2).
7
DLS6C
Page of 39
Display

Panasonic DLS6C Service Manual ▷ Download

  • DOWNLOAD Panasonic DLS6C Service Manual ↓ Size: 7.34 MB | Pages: 39 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Panasonic DLS6C in PDF for free, which will help you to disassemble, recover, fix and repair Panasonic DLS6C Audio. Information contained in Panasonic DLS6C Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.