DOWNLOAD LG WT-Y2K Service Manual ↓ Size: 5.51 MB | Pages: 66 in PDF or view online for FREE

Use appr
detergen
When wa
mild dete
for washi

For addin
quantity o
detergent
instructio

Use this program for  washing woolens.

(wash only “water washable” clothes)

Use jeans program when washing
heavy, thick, and extremely dirty
laundry such as jeans and work
outfits.

Use this mode for washing heavily dirty
laundry by soaking in water for some
time to remove proteins and fats.

Use this mode when washing lightly

soiled clothes for a short time. 

Select the
WOOL
program on the
Control panel.

Select the
DELICATE
program on the
Control panel.

The inner-tub rotates for 10
seconds to detect the laundry
load.
Then the Water Levels and the
amount of detergent to be used
will be shown and water will
be supplied.

Select the
SPEEDY
program on the
Control panel.

Select the Jean
program on the
Control panel.

Select the
desired program
(Not available
for “WOOL” &
“ DELICATE”
program).

Use this program for washing delicate
fabrics such as lingerie.
Before washing your woolens check the
care label for the washing instructions.
(wash only “water washable” clothes)

It is normal to wash lower water level before the main wash.

• Press ‘WASH’ button until ‘Soak 80’ lights on.

• Wash time except soak is changeable to 15, 21 by

pressing ‘WASH’ button

• Select No. of rinse and spin time by pressing button.

• ‘DELAY’ light is blinking and left time

is displayed.

Used for normal loads, this mode

automatically selects the most

appropriate conditions and completes

the sequence in one operation. The

built-in sensor detects the size of the

load and the ideal wash power and

wash, rinse and spin times are set

accordingly

■ WT-R852

opriate neutral

 for the laundry

shing woolens use a

rgent recommended

ng wool.

When the wash program
ends, the buzzer will ring
for 10 seconds before the
Power goes off
automatically.

If water is already in the tub, or wet laundry is
placed into the tub water will be added to the
optimal level before washing starts..
With lightweight bulky loads, water level can be
set to low. 
Changes to water temperature (hot/cold) and
wash level are possible during operation.   

Water may splash out when washing
light laundry such as a cashmere
blanket or bed sheet with water set at
high level. 

Soak time is 80min

Electrical power is
automatically off in
10sec. after buzzer
sounds.

When setting the water level manually, do not set
to MEDIUM to prevent damage to laundry.
Washing with hot water may damage the laundry 
(Water is set to  warm automatically). Ensure that
the load 
is under 3,5kg
In order to avoid  damage to laundry, 
the spin cycle may appear slow.
This also avoids wrinkles and clothing may still
contain some water. This is normal.
Soak Wash cannot be selected for the Wool and
Delicate Wash program.

g the appropriate

f detergent follow the

 manufacturer’s
n.

Water will be
supplied 
2 min. after the start
of the wash to
supplement the
water the laundry
has absorbed.

When the wash program
ends, the buzzer will ring
for 10 seconds before the
Power goes off
automatically.

Use app
detergen
When w
mild de
for wash

For addi
quantity
detergen
instructi

Use this program for  washing woolens.

(wash only “water washable” clothes)

Use jeans program when washing
heavy, thick, and extremely dirty
laundry such as jeans and work
outfits.

Use this mode for washing heavily dirty
laundry by soaking in water for some
time to remove proteins and fats.

Use this mode when washing lightly

soiled clothes for a short time. 

Select the
WOOL
program on the
Control panel.

Select the
DELICATE
program on the
Control panel.

The inner-tub rotates for 10
seconds to detect the laundry
load.
Then the Water Levels and the
amount of detergent to be used
will be shown and water will
be supplied.

Select the
SPEEDY
program on the
Control panel.

Select the Jean
program on the
Control panel.

Select the
desired program
(Not available
for “WOOL” &
“ DELICATE”
program).

Use this program for washing delicate
fabrics such as lingerie.
Before washing your woolens check the
care label for the washing instructions.
(wash only “water washable” clothes)

It is normal to wash lower water level before the main wash.

• Press ‘WASH’ button until ‘Soak 80’ lights on.

• Wash time except soak is changeable to 20, 30 by

pressing ‘WASH’ button

• Select No. of rinse and spin time by pressing button.

• ‘DELAY’ light is blinking and left time

is displayed.

Used for normal loads, this mode

automatically selects the most

appropriate conditions and completes

the sequence in one operation. The

built-in sensor detects the size of the

load and the ideal wash power and

wash, rinse and spin times are set

accordingly

■ WT-R902

ropriate neutral

t for the laundry

ashing woolens use a

ergent recommended

ing wool.

When the wash program
ends, the buzzer will ring
for 10 seconds before the
Power goes off
automatically.

If water is already in the tub, or wet laundry is
placed into the tub water will be added to the
optimal level before washing starts..
With lightweight bulky loads, water level can be
set to low. 
Changes to water temperature (hot/cold) and
wash level are possible during operation.  

Water may splash out when washing
light laundry such as a cashmere
blanket or bed sheet with water set at
high level. 

Soak time is 80min

Electrical power is
automatically off in
10sec. after buzzer
sounds.

When setting the water level manually, do not set
to MEDIUM to prevent damage to laundry.
Washing with hot water may damage the laundry 
(Water is set to  warm automatically). Ensure that
the load 
is under 3,5kg
In order to avoid  damage to laundry, 
the spin cycle may appear slow.
This also avoids wrinkles and clothing may still
contain some water. This is normal.
Soak Wash cannot be selected for the Wool and
Delicate Wash program.

ng the appropriate

 of detergent follow the

t manufacturer’s

n.

Water will be
supplied 
2 min. after the start
of the wash to
supplement the
water the laundry
has absorbed.

When the wash program
ends, the buzzer will ring
for 10 seconds before the
Power goes off
automatically.