DOWNLOAD LG WT-Y148RG Service Manual ↓ Size: 12.75 MB | Pages: 57 in PDF or view online for FREE

Model
WT-Y148RG
Pages
57
Size
12.75 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wt-y148rg.pdf
Date

LG WT-Y148RG Service Manual ▷ View online

21
3-5. OTRAS FUNCIONES
2) 
FAVORITE Wash
Select your favourite wash conditions.
• Press the WATER TEMP. button to select wash Water Temperature.
• Press the WATER LEVEL button to select  WATER LEVEL.
• Press the WASH button, the RINSE button & the SPIN button to
select wash time, rinse time & spin time respectively you want to
store.
3
Press the POWER(AUTO OFF) button to turn power on.
1
Select the FAVOURITE program.
2
Press the START/PAUSE button to store & start your favourite wash cycle. 
Power turns off automatically after wash.
4
Pressing the favourite button allows you to store your favourite wash conditions in the normal cycle
memory and then recall it for use at a later time.
Note
To recall your favourite cycle.
1. Press POWER on.
2. Select the favourite cycle by pressing the PROGRAM.
3. Press the START/PAUSE button. Then the wash cycle starts.
START
PAUSE
POWER
START
PAUSE
POWER
POWER
AUTO OFF
START
PAUSE
POWER
3-5. OTRAS FUNCIONES
3) SILENT Wash
22
Add the laundry into the washing tub.
3
Add the Detergent and close the lid.
5
Press the POWER (AUTO OFF) button to turn power on.
1
Use this program to wash quietly in SILENT especially during late night and dawn.
Note
• SILENT program takes longer washing time than FUZZY (Normal) program.
• To reduce noise in spinning, spin rpm is lower than normal spinning rpm. 
So the laundry has more moisture than normal.  
Press the  PROGRAM button to select SILENT program.
2
Press the START/PAUSE button.
4
START
PAUSE
POWER
POWER
AUTO OFF
START
PAUSE
POWER
START
PAUSE
POWER
Note
23
3-5. OTRAS FUNCIONES
4) TUB CLEAN
Press the START/PAUSE button.
3
After 10 minutes of water supplement. Add the oxygenated bleach (about 300m   ).
• Do not use Detergent box.
• Do not place any laundry inside tub.
4
Close the lid.
5
Press the POWER(AUTO OFF) button to turn power on.
1
If scrud is allowed to build-up in the machine it can result in stains on your clothes or unpleasant smell in your washer.
Scrud is the way build-up that can occur within any washer when the fabric softener comes into contact with
Detergent, and according to particular degree of dirtiness or quality of water to be use,
in these case, use this program to clean inner tub and outer tub. 
• Before using this program remove lint inside lint filter.
• When using this program, do not place any laundry inside tub.
• This program takes about 3 hours to be completed.
• After using this program, remove dirt inside filter.
• After finishing this program, open the lid of wash to remove irritant odor.
• Do not pour bleach into the tub directly. It might cause damage the tub.
• Do not leave diluted oxygenated bleach inside tub for long time.
It rusts the tub must drain the remained diluted oxygenated water out.
• Use this program once for every month. 
• Do not use this program repeatedly.
Press the  PROGRAM button to select the TUB CLEAN program.
•  Ex-Large WATER LEVEL is set automatically.
• Left time is displayed.
• When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid.
2
START
PAUSE
POWER
POWER
AUTO OFF
START
PAUSE
POWER
START
PAUSE
POWER
24
3-5. OTRAS FUNCIONES
5) DELAY START (RESERVATION) Wash
Press the  DELAY START (RESERVATION) button.
3
Press the POWER(AUTO OFF) button to turn power on.
1
Note
• Finishing time can be delayed from 3~48 hours. Delaying from3~12 hours can be done in 1 hour time intervals and from 12~48
hours in 2 hour time intervals. 
• If the lid is open,  the machine will not work, and  an alarm signal will alarm to remind you to close the lid. 
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press the    DELAY START
(RESERVATION) button and select the desired option. Then press the START/PAUSE button.
• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning program . (The
laundry will be wrinkled if left for a long time after spinning.)
Press the PROGRAM button to select the washing program.
• Select the  program for laundry on the Control panel.
This program will not work in WOOL and TUB CLEAN Program.
• When you press the START/PAUSE button the light will blink.
• The light will ‘ DELAY’ turn on and  ‘TIME  LEFT’                      will be marked.
• Press the button repeatedly to set the desired finishing time.  For example, To finish washing
in 9 hours from now,  by make the number 9:00 pressing the DELAY START (RESERVATION)
button repeatedly.
2
Add the laundry and press the START/PAUSE button.
5
DELAY START (RESERVATION) Wash is used to delay the finishing time of the operation. 
The hours to be delayed can be set by the user accordingly. 
The time on the display is the finishing  time , not  the start time. 
Add the Detergent.
• The appropriate quantity of Detergent marked next to the 
WATER LEVEL of WATER•DETERGENT.
• When the lid is open the machine will not operate, and an alarm
signal will remind you to close the lid
4
Close the lid. 
Finish
• Water will be supplied for 2 minutes after the start of the wash to
supplement the water the laundry has absorbed.
6
The washing will be finished according to the delayed time.
START
PAUSE
POWER
POWER
AUTO OFF
START
PAUSE
POWER
START
PAUSE
POWER
(RES.=DELAY)
Page of 57
Display

Click on the first or last page to see other WT-Y148RG service manuals if exist.