DOWNLOAD LG WT-R1274TP Service Manual ↓ Size: 3.64 MB | Pages: 51 in PDF or view online for FREE

Model
WT-R1274TP
Pages
51
Size
3.64 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wt-r1274tp.pdf
Date

LG WT-R1274TP Service Manual ▷ View online

3
1. SPECIFICATIONS
WT-R1(2)73(~5)TH(P/C), WT-Y4K, WT-R1275TH, WT-R1379TP
Refer to rating label on the back of Washer
Refer to rating label on the back of Washer
Refer to rating label on the back of Washer
Stainless
0.3kgf/cm
2
~ 8kgf/cm
2
250V, 8A for 220~240V/50Hz
125V, 12A for100~127V/60Hz
710 50 
Refer to rating label on the back of Washer
Refer to rating label on the back of Washer
DELICATE, WOOL, NORMAL, SPEEDY, JEAN
7 Stages
Available for 3 ~ 24 Hr
Magnet Sensor
Applied
Double
Applied
Applied
Applied
Applied
Model
Power Sourse
Input
Capacity
Inner Tub
Inlet Water Pressure
Rating of Fuse
Spin Speed
Dim.
Weight
Program
Water Level
Reservation
Lid Interlock Switch
Child Lock
Lint Filter
Softener Dispenser
Detergent Dispenser
Bleach Inlet
Auto Power Off
2. INSTALLATION INSTRUCTIONS
4
2-1. HOW TO INSTALL THE WASHING MACHINE
Selection of the installing place
Install the washer on the horizontal solid floor. 
If the washer is installed on an unsuitable floor,it could make considerable noise and vibration.
Do not install the washer in the following places 
Where  the washer is exposed to direct sunlight.
Near a heater or heating appliance.
Where the washer is exposed to freezing temperatures.
In damp environments such as bathrooms or harmful
environments such as near a coal gas source.
The proper installation of the washing machine can increase the wash effectiveness and the life of it.
If the washer is installed on an inclined floor, it could make considerable noises and vibration
and could cause a malfunction.
Use the adjustable leg spindle to adjust the level of washing so that it sits properly. 
Install the washing machine on a level and firm surface.
Keep the washing machine more than 10cm from the wall to prevent vibration noise 
during spinning
The base opening must not be obstructed by carpeting when the washing machine is
installed on a carpeted floor.
Wooden floors may need reinforcing to prevent the normal vibration which occurs with an
unbalanced load.
10cm
10cm
10cm
5
2-1. HOW TO LEVEL THE WASHING MACHINE
Check the level of the washing machine using a spirit level on the side of the washer cabinet
You can check the level also by visually lining up the washer with the fills, adjacent   walls or cabinets.
You can level the washer using the adjustable leg spindle fitted to the cabinet.
Screw the ADJUSTABLE LEG SPINDLE legs up or down as required.
When washing machine does not even out, turn ADJUSTABLE LEG SPINDLE right or left to be level.
Location of drop
Cause
How to adjust
Adjust the front adjusting plate with the adjustable
legs(2) or adjust the adjustable legs.
Adjust the rear adjusting plate with the adjustable
legs(2) or adjust the supporting plate.
Adjust the left part of the front and rear adjusting 
plates or the supporting plate.
Adjust the right part of the front and rear adjusting 
plates or the supporting plate.
When the front is lower.
When the rear is lower.
When the left is lower.
When the right is lower.
6
2-2. CONNECTING WATER SUPPLY HOSE
Before connecting Water Supply Hose to water tap, check your hose type
and choose correct instruction. Water Supply Hose may vary according to
the country.
Make sure connect blue inlet hose to cold water tab, and orange inlet hose
to hot water tab.    
Connecting Water Supply Hose to water tap
Rubber packing
Water supply hose
Connector
Untighten the screw
Untighten the screw of the connector so
that the tap can be placed in the middle.
Fixing the connector to the tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
Attach the water supply hose to the connector
Push the water supply hose vertically
upwards so that the rubber seal  within the
hose can adhere completely to the tap.
Check the connection of water supply hose and the connector
After connecting the hose, open the tap to
check for any water leakage.
In case of water leakage, close the tap and
start again from step 1
Fixing the connector of connector and water supply hose
Attach the water supply hose to the
connector and then tighten it by screwing it
to the right.
Normal Type
Normal tab without thread & screw type inlet hose.)
1
2
3
4
5
Page of 51
Display

LG WT-R1274TP Service Manual ▷ Download

  • DOWNLOAD LG WT-R1274TP Service Manual ↓ Size: 3.64 MB | Pages: 51 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the LG WT-R1274TP in PDF for free, which will help you to disassemble, recover, fix and repair LG WT-R1274TP Washing Machine. Information contained in LG WT-R1274TP Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.