DOWNLOAD LG WT-R1274TP Service Manual ↓ Size: 3.64 MB | Pages: 51 in PDF or view online for FREE

HOT

S

M

L

XL

HEAVY

SOAK

80

NORMAL

LIGHT

COLD

n 

• The Normal program is used for average day to day washing.
• Press POWER ON button.
• Load clothes.

• Add detergent, bleach and conditioner as desired.
• Close the lid and press START/PAUSE button.
• The water level lights will scroll up and down while the washer is

working out the optimum water level for your clothes load.

• Use to select water levels.
• Available during washing.
• For appropriate quantity of

detergent follow the
detergent manufacturer’s
instruction.

• Use it at night to wash quietly.
• When selected “Silent” lights are

on and the other cycle’s light is
all off.

• On : will do
• Blink : doing
• Off : Done

• Use to select proper water

temperature while running.

• Available during washing.
• Only warm (cold & hot) water for 

“WOOL” & “DELICATE”

• Use to change washing time, the number of rinse, spin time.
• To change washing time, the number of rinse, spin time

during wash, do it after pressing “START/PAUSE” button.

• Soak is used to remove old or hardened dirt more

effectively.
You can change wash time after soak(80min.)

• Choose 1min Spin to avoid wrinkle

The control panel may differ according to different models

• Default is NORMAL. 

By pressing button 
[HEAVY 

‘

 

LIGHT 

‘

NORMAL] mode repeats.

• Available all cycle
• Available during washing.

n 

• Other programmes are selected as follows.
• Press POWER ON button.
• Load clothes.
• Add detergent, bleach and conditioner as desired.

• Select temperature, level, process, program and options as

described below.

• Close the lid and press START/PAUSE button.

• Use this function

for delayed
washing.

• Use it to set the

delayed time.

• Not available for

delicate.

• Available from

3~24Hr

• Use it to select washing programs.
• By pressing the button, it cycles 

[NORMAL 

‘

SPEEDY 

‘

JEAN 

‘

SILENT 

‘

DELICATE 

‘

 

SILENT 

‘

WOOL ] 

• Use it to turn on and off.

By pressing the button 
[On 

‘

Off] are repeated.

• Electrical power automatically turns off

10sec, after the washing cycle finishes with
“boo~” sound.

• Electric power automatically turn off after

10min. in ‘Pause’ condition.

Use to lock or unlock the control
buttons to prevent setting from
being changed by a child.
To lock, push the RINSE, and
SPIN buttons simultaneously
and to unlock push them one
more time during the washing
process.

• Used to indicate the time left of all processes or delay.
• In case of abnormal operation the following indications

are displayed 

- PE : Abnormal water sensor (No Sensing Water Levels)
- LE : Abnormal motor (No Spin)
- UE : Unbalanced load

• Use it to start or

pause.
By pressing the
button [Start 

‘

Pause] are
repeated.

• In case of

abnormal
operation problem
will be light and a
buzzer will sound.

Use this program for  washing woolens.
(wash only “water washable” clothes)

Use jeans program when washing
heavy, thick, and extremely dirty
laundry such as jeans and work
outfits.

Use this mode for washing heavily
dirty laundry by soaking in water for
some time to remove proteins and
fats.

Use this mode when washing
lightly soiled clothes for a short
time. 

Select the
WOOL
program on
the Control
panel.

Select the
DELICATE
program on
the Control
panel.

The inner-tub rotates for 10
seconds to detect the laundry
load.
Then the Water Levels and
the amount of detergent to be
used will be shown and water
will be supplied.

Select the
SPEEDY
program on
the Control
panel.

Select the
Jean
program on
the Control
panel.

Select the
desired program
(Not available for
“WOOL” & “
DELICATE”
program).

Use this program for washing delicate
fabrics such as lingerie.
Before washing your woolens check the
care label for the washing instructions.
(wash only “water washable” clothes)

It is normal to wash lower water level before the main wash.

• Press ‘WASH’ button until ‘Soak 80’ lights on.
• Wash time except soak is changeable to 15, 21 by

pressing ‘WASH’ button

• Select No. of rinse and spin time by pressing button.

• ‘DELAY’ light is blinking and left

time is displayed.

Used for normal loads, this mode
automatically selects the most
appropriate conditions and completes
the sequence in one operation. The
built-in sensor detects the size of the
load and the ideal wash power and
wash, rinse and spin times are set
accordingly

Use appropriate neutral
detergent for the laundry
When washing woolens use a
mild detergent recommended
for washing wool.

When the wash program
ends, the buzzer will ring
for 10 seconds before
the Power goes off
automatically.

If water is already in the tub, or wet laundry is placed
into the tub water will be added to the optimal level
before washing starts..
With lightweight bulky loads, water level can be set to
low. 
Changes to water temperature (hot/cold) and wash level
are possible during operation. 

Water may splash out when washing light laundry such
as a cashmere blanket or bed sheet with water set at
high level. 

Soak time is 80min

Electrical power is
automatically off in
10sec. after buzzer
sounds.

When setting the water level manually, do not set to
MEDIUM to prevent damage to laundry.
Washing with hot water may damage the laundry 
(Water is set to  warm automatically). Ensure that the load 
is under 3,5kg
In order to avoid  damage to laundry, 
the spin cycle may appear slow.
This also avoids wrinkles and clothing may still contain some
water. This is normal.
Soak Wash cannot be selected for the Wool and Delicate
Wash program.

For adding the appropriate
quantity of detergent follow
the detergent
manufacturer’s instruction.

Water will be supplied 
2 min. after the start of
the wash to
supplement the water
the laundry has
absorbed.

When the wash
program ends, the
buzzer will ring for 10
seconds before the
Power goes off
automatically.