LG WT-R1235TP Service Manual ▷ View online
32
2) Disassembly of Back Panel, Power
Cord, Inlet Valve & BP Sensor
Remove two back panel fixing screws in the
back side.
back side.
Disassemble the back panel.
Disconnect two connectors and disassemble
the power cord.
the power cord.
Remove a valve fixing screw & disconnect the
leads form the inlet valve.
leads form the inlet valve.
Remove the inlet valve.
Disconnect the leads & the pressure tube from
the BP sensor.
the BP sensor.
Remove the BP sensor.
3) Disassembly of Lid Assembly
& Top Cover
Remove Q-spring & two hinge pins then
disassemble the lid assembly
disassemble the lid assembly
Remove two top cover fixing screws in the
rear then disassemble the top cover.
rear then disassemble the top cover.
Lid Hinge
Inlet valve
Power cord
BP sensor
Q-spring
Location P/No. PIVOT(Color)
K101
NATURAL
33
Pulsator
5) Disassembly of Back Cover, Drain Pump,
Clutch(Transmission) & Motor
Remove back cover fixing screws then disassemble
the back cover.
the back cover.
Disconnect the leads and the drain hose-p from the
drain pump.
drain pump.
Remove the pump fixing screws then
disassemble the drain pump.
disassemble the drain pump.
Fall down the washer for clutch & motor removal.
Remove the belt.
Disassemble the clutch.
Remove two motor fixing screws then
disassemble the motor.
disassemble the motor.
6) Replacement of Damper asm
Separate top cover from washing machine.
As in the fig, lift snubber bar and take it out of out
case with out tub.
case with out tub.
Damper assembly shall not be disassembled.
Replace damper as assembly.
Replace damper as assembly.
For assembly, keep the following. (Location & color)
Tub cover
Inner tub
Hub fixing nut
Leads
Drain hose
Pump fixing screw
4) Disassembly of Tub Cover,
Pulsator & Inner Tub
Remove tub cover fixing screws then
disassemble the tub cover.
disassemble the tub cover.
Remove the pulsator fixing screw then
disassemble the pulsator.
disassemble the pulsator.
Remove the hub fixing nut by a special tool.
Disassemble the inner tub.
34
7) Replacement of Clutch Housing Asm
Disassemble the Clutch Housing Asm bolt
with boxer or spanner. (M12)
(
with boxer or spanner. (M12)
(
Before disassemble the Clutch Housing
Asm, disassemble the Brake Motor)
Asm, disassemble the Brake Motor)
Pulsator Revolving Cam
Clutch
Clutch Housing Asm
Brake Motor
Stator
Rotor
Clutch
Motor
Pulsator
Inner Tub
Outer Tub
Brake
Motor
35
• To use the CHECK PROGRAM (QC TEST MODE), press WATER LEVEL and POWER button ON without
depositing any laundry.
• In QC TEST MODE all LEDs are on and press START(PAUSE) button to check over the following items.
4-5. TEST RUNNING WITHOUT WATER
Click on the first or last page to see other WT-R1235TP service manuals if exist.