LG WT-R1233TH Service Manual ▷ View online
32
3) Child Lock function
After all washing conditions are set according to the manual.
Press the POWER button.
Press the START/PAUSE button to start washing.
• During the wash program, all the buttons are locked until
washing is completed or until the child- lock function is
deactivated manually.
deactivated manually.
Press both the RINSE button and the SPIN button simultaneously.
Turn Power on.
If you want to lock all the keys to prevent all settings from being changed by a child, you can use the child lock
option.
option.
If you want to unlock during wash, press both the RINSE and the SPIN button simultaneously
again.
again.
How to Lock
How to Unlock
In child-Lock mode, the LED display continuously repeats
and remaining time.
Note
2
1
3
START
PAUSE
RINSE
SPIN
AUTO OFF
33
Wash Inner-tub
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
the inner-tub use a clean soft cloth dampened with liquid detergent, then rinse. (Do
not use harsh or gritty cleaners.)
the inner-tub use a clean soft cloth dampened with liquid detergent, then rinse. (Do
not use harsh or gritty cleaners.)
Inlet Hoses
Hoses connecting washer to faucet should be replaced every 5 years.
Exterior
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with
sharp objects.
sharp objects.
Long Vacations Be sure water supply is shut off at faucets. Drain all water from hoses if weather will
be below freezing.
When there is a fear of freezing
If frozen
• Remove the water supply hose, and immerse it in hot water at approx.. 40 .
• Pour approx.. 2 liters of hot water at approx.. 40 , into the bowl and let it stand for 10 minutes.
• Connect the water supply hose to the water tap and confirm that the washing machine performs
• Pour approx.. 2 liters of hot water at approx.. 40 , into the bowl and let it stand for 10 minutes.
• Connect the water supply hose to the water tap and confirm that the washing machine performs
the supply and drainage of water.
• Close the water taps and remove the Water Supply Hose.
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.
Cleaning the Inside of your Washer
If you use fabric softener or do regular cold water washing, it is very important that you occasionally
clean the inside of your washer.
clean the inside of your washer.
• Fill your washer with hot water.
• Add about two cups of a powdered detergent that contains phosphate.
• Let it operate for several minutes.
• Stop the washer, open the lid and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle.
• Add about two cups of a powdered detergent that contains phosphate.
• Let it operate for several minutes.
• Stop the washer, open the lid and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle.
We do not recommend that you wash clothes during this procedure.
3-6. CARE AND MAINTENANCE
34
4. SERVICE INFORMATION
4-1. SCHEMETIC DIAGRAM
35
4-2. WIRING DIAGRAM
A) For Pump Model
B) For non Pump Model
Click on the first or last page to see other WT-R1233TH service manuals if exist.