DOWNLOAD LG WT-H9556 Service Manual ↓ Size: 3.85 MB | Pages: 57 in PDF or view online for FREE

Model
WT-H9556
Pages
57
Size
3.85 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wt-h9556.pdf
Date

LG WT-H9556 Service Manual ▷ View online

35
 
 
 
 
3) Disassembly of Back cover, Drain
Pump.
Remove back cover fixing screws then
disassemble the back cover.
1
Disconnect the leads and the drain hose-p from
the drain pump.
2
Remove the pump fixing screws and the
connector hose disassemble the drain pump.
3
4) Replacement of Damper asm
Separate top cover from washing machine.
1
For assembly, keep the following.(Location & color)
4
As in the fig, lift snubber bar and take it out of
out case with out tub.
2
Damper assembly shall not be disassembled.
Replace damper as assembly.
3
Location
P/No.
PIVOT(Color)
A102
,
MIDDLE BLUE
A101
WHITE
A
B
,
C
D
36
Water Guide
Fixing Bolt
Hall Sensor
Stator Housing
6) Replacement of Rotor & Stator
Disassemble rotor nut with boxer(M18) or spaner.
( In assembled, the force is over than 200kgf.cm)
Disassemble rotor,  pull out the rotor as shown the
figure.
Disconnect fixing screw and disassemble the water
guide.
Before disassemble stator,disconnect the hall sensor
and stator housing.
37
7) Replacement of Bearing housing asm
SNAP RING.
Hall Sensor
Stator Housing
Water Guide
Loosen the 6 fixing screws on the stator. 
(Lower  upper position screws)
Check the direction of SNAP RING.
(The handle of snap ring is toward to rotor and stator.)
Preventing fallen the stator, tighten with one hand and
then loosen the last screw.
For assembly take care lead wire's state, it produce a
noise and cut attach the rotor.
Loosen 14 Fixing screws on the Bearing Housing ASM
and pull up it.
38
4-6. TEST RUNNING WITHOUT WATER
• To use the CHECK PROGRAM (QC TEST MODE), press WATER LEVEL and POWER button ON without
depositing any laundry.
• In QC TEST MODE all LEDs are on and press START(PAUSE) button to check over the following items.
NO
CHECK METHOD
DISPLAY
CHECK ITEM
1
2
3
4
5
6
7
8
9
Initial state
Press once
Press twice
Press 3 times
Press 4 times
Press 5 times
Press 6 times
Press 7 times
Press 8 times
• WATER LEVEL frequency is
on DISPLAY in the condition of
no water in TUB.
• After detecting laundry amount
the number of pulse is on the
DISPLAY.
• AUTO OFF
• All LEDS ON.
64~70 DISPLAY.
• Laundry amount test.
• COLD water.
• HOT water. (option)
• If Error of water temperature sensor is 
occured           is on the display.
• Shower Valve
• If the LID is opened,            is on the
DISPLAY. In that case, close the LID.
• DRAIN MOTOR is 1st start.
• DRAIN MOTOR is 2nd start.
• DRAIN PUMP is on.
• All LEDS OFF.
Page of 57
Display

Click on the first or last page to see other WT-H9556 service manuals if exist.