LG WT-D182VG Service Manual ▷ View online
8
Caution
1
Attach the water supply hose to the tap.
Screw Type
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
packing within the hose can adhere completely to
the tap.
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and then tighten
it by screwing it to the right.
it by screwing it to the right.
3
Check water leakage.
Connecting Water Supply Hose to the machine
After connecting the hose, open the tap to
check for any water leakage.
check for any water leakage.
• Connect the water supply hose to intel valve
of the washing machine, and then lock it by
turning the hose connecting part.
turning the hose connecting part.
• Check to see if there is a rubber seal inside
the connector.
For the cold water (1valve) model, Do not connect to the hot water supply.
It will damage your clothes.
It will damage your clothes.
9
1
Fit the end of the drain hose to the outlet of the drain pump and tighten the clamp.
Pump Model
Non-Pump Model
0.9~1.2m
Cable Tie
Cable Tie
0.9~1.2m
2
Firmly insert the free end of the drain hose into the drain opening of your home.
Make sure the soft rubber end is completely inside the drain opening.
Make sure the soft rubber end is completely inside the drain opening.
• If the water valves and drain are built into the wall,fasten the drain hose to one of the water hoses
with the cable tie (ribbed side on inside).
• If your drain is a standpipe,,fasten the drain hose to the standpipe with the cable tie provided.
1
Before connecting
Ensure that the hose clip is set as indicated here.
2
Connect the Elbow Hose
Push the elbow hose toward the body of the washing machine.
3
Place the Drain Hose
To change the direction of the hose,pull out the elbow hose and change
the direction.Repeat Step 2.
the direction.Repeat Step 2.
2-3. CONNECT THE DRAIN HOSE
WARNING
• The washer should never be installed or stored in a location subject to freezing temperatures.
If the washer was exposed to freezing temperatures prior to installation,allow it to stand at room
temperature for several hours before use.Damage to the water lines and internal mechanisms of
the washer can result.
• Water supply pressure must be between 14.5 psi and 116 psi ((100 ~800kPa)If the water supply
pressure is more than 116 psi,a pressure reducing valve must be installed.If you have
uncontrolled water temperature and pressure you should fit a temperature and pressure relief
valve
to ensure that water temperature and water pressure remain within the safe limits.Consult a
plumber or electrician if you are unable to adjust water temperature and or pressure.Failure to
do so can result in damage to the machine.
• Plug the power cord of washer into a properly grounded outlet..Failure to do this can result in
shock or serious injury.
The discharge height should be approximately 0.9~1.2m from the floor.
NOTE
10
3. OPERATING INSTRUCTION
3-1. IDENTIFICATION OF PARTS
POWDER AND LIQUID
DETERGENT BOX
DETERGENT BOX
WATER
SUPPLY HOSE
Make sure the
water does not
leak.
SUPPLY HOSE
Make sure the
water does not
leak.
POWER PLUG
If the supply cord is
damaged, it must be
replaced by the
manufacturer or its
service agents or
similarly qualified
person in order to
avoid a hazard.
If the supply cord is
damaged, it must be
replaced by the
manufacturer or its
service agents or
similarly qualified
person in order to
avoid a hazard.
Multi Clean Filter
DRAIN HOSE
for pump model
for pump model
Check if the drain
hose is hung up
before operating the
washing machine.
BASE
FUNCTION
SELECTOR
SELECTOR
TUB
START/PAUSE
BUTTON
Use to start or
stop the washing
machine
temporarily.
BUTTON
Use to start or
stop the washing
machine
temporarily.
ADJUSTABLE LEGS
Use to level the washing
machine for correct
balance & spin
operation.
Use to level the washing
machine for correct
balance & spin
operation.
DRAIN HOSE
for non pump
model
for non pump
model
BODY
Do not wash fabrics containing flammable materials
(waxes, cleaning fluids, etc.).
Load Size
The WATER LEVEL should just cover the clothes. Adjust the load size
accordingly. Loosely load clothes no higher than the top row of holes in
the washer tub. To add items after washer has started, press START
button and submerge additional items. Close the lid and press START
button again to restart.
Light and Large-sized clothing
Clothes like downs and woollens are light weight, large and float easily.
Use a nylon net and wash them in a small amount of water. If the laundry floats during the wash cycle,
it may become damaged. Use dissolved Detergent to prevent the Detergent from clumping.
Long laundry items
Use nylon nets for long, DELICATE items. For laundry with long strings or long length , a net will
prevent tangling during washing.
Fasten zippers, hook, and strings
to make sure that these items
don't snag on other clothes.
Nylon net is not supplied by LG.
11
3-2. BEFORE STARTING TO WASH
Care Labels
Sorting
Pretreatment on stains or heavy soil
Check before Loading
Loading
* Look for a care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Sort clothes into loads that can be washed with the same wash cycle, Water Temperature and spin speed.
To get the best results, different fabrics need to be washed in different ways.
•
•
SOIL
(Heavy, Normal, Light)
Separate clothes according to the type and amount of soil.
•
COLOR
(Whites, Lights, Darks)
Separate white fabrics from colored fabrics.
•
LINT
(Lint producers, Collectors)
Separate lint producers and lint collectors.
Lint Producers
Terry cloth, Chenile, Towels, Nappies, Diapers
Lint Collectors
Synthetics, Corduroy, Permanent Press, Socks
•
Check all pockets to make sure that they are empty
. Things such as nails, hairclips, matches, pens, coins,
and keys can damage both your washer and your clothes.
•
Mend any torn garments or loose buttons
. Tears or holes may become larger during washing.
• Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
•
Pretreat any dirt and stains
.
• Make sure the clothes are washable in water.
• Check the washing instructions.
• Remove tissue in pockets.
• Pretreat shirt collars and cuffs with a pre-wash product or liquid Detergent when placing them in the washer.
Before washing treat special stains with bar soaps, liquid Detergent or a paste of water and granular Detergent.
• Use a pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type
of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING
WIRE
Click on the first or last page to see other WT-D182VG service manuals if exist.