DOWNLOAD LG WT-D182VG Service Manual ↓ Size: 4.02 MB | Pages: 54 in PDF or view online for FREE

• Use for selecting wash program.
• This button allows you to  select 12

different  programs for  different kinds  of
laundry and dirtiness.

• program selections light up in sequence as

COTTON/NORMAL     SMART CLEANING

ECO COTTON     FAVORITE     TOWELS
QUICK WASH     TUB CLEAN

BULKY/BEDDING     WOOL
by pressing the button.

• Use to set a delayed finishing time.
• The time increases when the button

is pushed.

• The following settings are indicated

as the button is pushed 3    4    5
... 11    12    14    16    ...18    3
HOUR.

• To cancel delay time, turn the power

switch off.

(refer to page 24)

• Use to start or pause the

washing process.

• Repeats start and pause by

pushing the button.

• It only operates in FUZZY Program..
• During being detected by the sensor,,the LED flashes green,orange

and red in turn.And,after detecting,the LED lights a specific color according to the detecting condition as
follows:

If the current washing condition (Detergent quantity,Water Temperature,water quality,etc.)is determined as
better than the standard one,it optimizes the algorithm to save the energy by decreasing washing       
time/strength,
and the LED automatically turns to red.
If the current washing condition is determined as worse than the standard one,it optimizes the algorithm by
increasing washing time/strength,and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one,the algorithm has no change and the
LED turns to green.

• It marks the place to put the

phone to receive signal when a
problem occurs.

• Use to turn the power on or off.
• Push again and power goes on or off
• The power goes off automatically

*Because the detecting ability of the sensor may be decreased by using it for a long time,periodically use

TUB CLEAN course to clean the tub.(refer to page 21)

*Even if the water level is changed by the user in FUZZY(Normal)Program,

the sensor will still work.The sensor algorithm may differ according to models.

*The control panel may differ according to different models.

Used for normal loads, this mode
automatically selects the most
appropriate conditions and completes the
sequence in one operation. The built-in
sensor detects the size of the load and
the ideal wash power and wash, rinse
and spin times are set accordingly.

• Add the appropriate

quantity of Detergent as
indicated by the WATER
LEVEL.
Or follow the Detergent
manufacturer’s
instructions

• Use neutral Detergent

appropriate for the
laundry.

• When washing woolens

use a mild Detergent
recommended for washing
wool.

• Select the

WOOL
program on
the Control
panel.

• Add the appropriate

quantity of Detergent as
indicated by the
WATER LEVEL
Or follow the Detergent 
manufacturer’s
instructions

• Select the

QUICK
WASH
program on
the Control
panel.

• Select the

BULKY/BEDDING
program on the
Control panel.

• Select the 

SMART
CLEANING
program on the
Control panel.

• Spread

the jean
evenly in
the tub

Use this program for washing delicate
fabrics such as lingerie and woolens. (wash
only “water washable” clothes)
Before washing your woolens check the
care label for the washing instructions.
(wash only water washable clothes)

Use this mode when washing lightly
soiled clothes for a short time. The
highly recommended laundry amount
is under 2.0kg.

Use BULKY/BEDDING program
when washing BULKY/BEDDING
of different sizes

Use this program to increaserinsing
performance.
This would include underwear and baby
clothes.
If someone has sensitive skin or skin
trouble,use this program.

• Add the appropriate

quantity of Detergent as
indicated by the
WATER LEVEL
Or follow the Detergent
manufacturer’s
instructions

• Select the 

TOWELS
program on the
Control panel.

• The pulsator rotates for 8

seconds to detect the laundry
load.

• Then the WATER LEVEL and

the amount of Detergent to
be used will be shown and
water will be supplied.

• Water will be supplied for 2

minutes after the start of the
wash to supplement the
water the laundry has
absorbed.

• When the wash program

ends, the buzzer will ring
for 10 seconds before the
Power goes off
automatically.

• If water is already in the tub, or putting

wet laundry into the tub before starting
will increase the WATER LEVEL. 

• With lightweight bulky loads, WATER

LEVEL can be set low. 

• Changes to Water Temperature

(HOT/COLD) and wash level are
possible during operation.  
(refer to page 14) 

• When setting the WATER LEVEL manually, do not

set to Medium to prevent damage to laundry.

• Washing with HOT water may damage the laundry

(Water is set to cold automatically). Ensure that
the load is under 2kg.

• In order to avoid  damage to laundry, the spin

cycle may appear slow. This also avoids wrinkles
and clothing may still contain some water. This is
normal.

• When static pressure of water is

more than 2kg/cm2, the QUICK
WASH course will be within
19min.

Use this program to wash  Towels, Shirts,
Sheets,mixed loads.

Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty. 
SOAK mode can be used with COTTON/NORMAL or BULKY/BEDDING or SMART
CLEANING or ECO COTTON or FAVORITE program.

Press the POWER (AUTO OFF) button to turn power on.

Press the PROGRAM button to select the washing program.

Press the WASH button, to select SOAK program.

Add the Detergent. 

Add the laundry and press the START/PAUSE button.

• Keep pressing the WASH button until the light turns on

‘SOAK’ and ‘WASH’ simultaneously as next image.

• SOAK program only works when socking time is 40, 50 or

60 minutes. 

• Add the appropriate quantity of Detergent as the Detergent

manufacture instruction.

• The WATER LEVEL will be shown and water will be supplied.

Close the lid. 

Finish

• Water will be supplied for 2 minutes after the start of the wash to

supplement the absorbed water by the laundry. 

• When the wash program ends, the buzzer will ring for

10seconds before the Power goes off automatically.

• Order of Soak-Wash timing

• Select soaking time 40minutes, 50minutes, or 60minutes (including washing time) by pressing the Wash

button repeatedly.  

• If necessary, select the times of Rinse and the time for Spinning by pressing the Rinse or Spin buttons till

you reach the desired times. 

Soak-Wash