LG WP-9250 Service Manual ▷ View online
Off
2
4
1
5
3
Wash Timer
8
4
5
3
1
2
6
7
Strong
Gentle
Normal
WASH COVER
ASM
SPIN DRYER
COVER ASM
Off
6
12
3
15
9
3. CONTROLS LOCATION
3-1. PARTS IDENTIFICATION
Accessories
Safety Cover
Inlet Hose
SUPPLY
SELECTOR
LEVER
OVER FLOW
OVER FLOW
FILTER W/o Net
TUB
PULSATOR
SAFETY
COVER-2
SPIN DRYER
BASKET
EARTH WIRE
(For moels with
two prong plug)
SAFETY
COVER-1
POWER CORD
Hot Water Inlet:
1.
Select this inlet when opting for hot water wash.
Cold Water Inlet:
Cold Water Inlet:
2.
Select this inlet when opting cold water wash.
Water Selector:
Water Selector:
3.
Select "WASH" to supply water for washing and rinsing and
"SPIN" for spin shower rinse.
Wash Timer:
"SPIN" for spin shower rinse.
Wash Timer:
4.
Select the desired time for washing or rinsing.
Wash Selector:
Wash Selector:
5.
Sel the Selector to "GENTLE", "NORMAL", "STRONG"
according to kinds and quantity of the laundry.
Drain Selector:
according to kinds and quantity of the laundry.
Drain Selector:
6.
Select "WASH RINSE" for washing and rinsing, and "DRAIN"
to drain the water from the tub.
Spin Timer:
to drain the water from the tub.
Spin Timer:
7.
Select the desired time for spinning. Max. limit is 5 min. Don't
rotate the knob more than prescribed limit.
rotate the knob more than prescribed limit.
Buzzer:
8.
It is electrically operated to facilitate you to know the
completion of washing cycle.
completion of washing cycle.
-5-
Note: Pls do not match Panel Graphics with the actual Machine
2. Remove the Brake Strap from SD Cover.
Remove the Q-spring (Fig. 17).
3.
Remove the screw fastening the door switch and
remove the door switch (Fig. 17).
remove the door switch (Fig. 17).
4.
Q-Spring
Door
Switch
Switch
5.
4-2. Spin Dryer Cover replacement
4-3. Spin Dryer Basket Assembly
replacement
replacement
Open the spin dryer cover and separate the brake
wire assembly from the tub, in the direction of
arrow(Fig. 16).
wire assembly from the tub, in the direction of
arrow(Fig. 16).
1.
After removing the back cover, the panel assembly,
proceed as follows:
proceed as follows:
Remove the spin dryer cover by widening between the
hinge hole of the SD Cover Guide and the hinge of the
spin dryer cover and pulling up the spin dryer cover
(Fig. 18).
hinge hole of the SD Cover Guide and the hinge of the
spin dryer cover and pulling up the spin dryer cover
(Fig. 18).
To assemble the spin dryer cover assembly, reverse
the disassembly procedure.
the disassembly procedure.
To assemble the spin dryer basket assembly, reverse
the disassembly procedure.
the disassembly procedure.
Unscrew the screw at the left corner in the safety
cover-1.
cover-1.
1.
After removing the back cover, proceed as follows:
Take hold of the front of the safety cover-1.
2.
Pull the safety cover-1 upward.(Fig. 19).
4.
Push the tub by the other hand.
3.
Loosen the fixing bolt of the coupling assembly
fastening the spin shaft (Fig. 20).
fastening the spin shaft (Fig. 20).
5.
Pull out completely the spin basket assembly (Fig. 21).
6.
-8-
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Brake strap asm
Brake wire assembly
Click on the first or last page to see other WP-9250 service manuals if exist.