DOWNLOAD LG WP-890QP Service Manual ↓ Size: 3.19 MB | Pages: 27 in PDF or view online for FREE

-8-

After removing the back cover, the panel assembly,
proceed as follows:

1. Open the spin dryer cover and separate  brake wire

strap from the brake wire assembly (Fig. 15).

Brake wire starp

Brake wire assembly

After removing the back cover, proceed as follows:

1. Unscrew the screw at the left corner in the safety

cover-1.

2. Take hold of the front of the safety cover-1. 

3. Pull the tub by the other hand.

4. Pull the safety cover-1 upward.(fig. 18)

Safety cover-1

Safety cover-2

 Spin dryer cover

2. Remove the Q-spring(Fig. 16).

3.Remove the screw fastening the door switch and

remove the door switch(Fig. 16).

4. Remove the spin dryer cover by widening between the

hinge hole of the tub and the hinge of the spin dryer
cover and pulling up the spin dryer cover(Fig. 17).

5. Loosen the fixing bolt of the coupling assembly

fastening the spin shaft(Fig. 19).

6. Pull out completely the spin basket assembly(Fig. 20).

To assemble the spin dryer cover assembly, reverse
the disassembly procedure.

To assemble the spin dryer basket assembly, reverse
the disassembly procedure.

Fig.15

Fig. 16

Fig.17

Fig. 18

Fig. 19

Fig. 20

-9-

After removing the back cover, opening the spin dryer
cover, and removing the spin dryer basket, proceed
as follows:

1. Remove the brake wire holder-A in the direction of

the arrow.(Fig. 21).

Brake wire assembly

2. Separate the brake wire assembly from the brake

wire holder.(Fig.22)

7. Hold the spin motor and remove the three hooks

from the base(Fig. 25).

8. Remove the spin motor.

9. Remove the screws fastening the vibration damper

assemblies and remove the vibration damper
assemblies(Fig. 26).

3. Take out the brake wire assembly from the brake

assembly.(Fig. 23)

4. Disconnect the lead wires and remove the V-belt.

5. Lay the washing machine on its front side on a

blanket or cardboard.

6. Remove the screws fastening the base and remove

the base from the outcase(Fig. 24).

Fig. 21

Fig. 22

Fig. 23

Fig. 24

Fig. 25

Fig. 26

-10-

Fig. 28

Fig. 29

Fig. 32

Fig. 30

Fig. 31

Lower bolt

Fig. 27

10. Loosen the fixing bolt fastening the motor shaft

and pull up the coupling assembly(Fig. 27).

2. Disconnect the lead wires.

3. Lay the washing machine on its front side on a

blanket or cardboard.

4. Remove the screws fastening the base and remove

the base from the outcase(Fig. 30).

5. Remove the screws and the washers, remove the

wash motor and remove the wash motor
damper(Fig. 31).

6. Loosen the socket bolt of the motor pulley

assembly and pull up the motor pulley assembly
from the motor.

To assemble the wash motor, reverse disassembly
procedure.

11. Remove the screws fastening the brake assembly

and remove the brake assembly(Fig. 28).

To assemble the spin motor, reverse the disassembly
procedure.

After removing the back cover and the spin dryer
basket, proceed as follows:

1. Remove the V-belt from the pulsator pulley(Fig. 29).

-11-

After removing the panel assembly, the safety cover
assembly, the spin dryer basket assembly, the spin
dryer cover, the washing cover, the Q-spring, the
nozzle case, the door switch and the back cover,
proceed as follows:

1. Disconnect the drain hose or the drain hose-D

(Pump model).

2. Remove the V-belt from the pulsator pulley(Fig. 33).

After removing the back cover and opening the
washing cover, proceed as follows:

1. Take out the pulsator cap with "-" type driver.

2. Loosen the pulsator fixing screw and pull up the

pulsator(Fig. 35).

3. Remove the screws fastening the washing tub

assembly and pull it out(Fig. 34).

3. Remove the V-belt(Fig. 36).

4. Lay the washing machine on its front side on a

blanket or some cardboard.

5. Unscrew and remove the screws fastening the base

and remove the base assembly(Fig. 37).

To assemble the washing tub assembly, reverse
the disassembly procedure.

Apply adhesive on hose joint to prevent
water leaks.

Fig. 33

Fig. 34

Fig. 35

Fig. 36

Fig. 37