DOWNLOAD LG WP-890QP Service Manual ↓ Size: 3.19 MB | Pages: 27 in PDF or view online for FREE

Motor type

2-pole single phase shadding coil motor

Power consumption(Rated input)

70W

Motor output

20W

Lift head of draining

1m

Material

Polypropylene resin

R. p. m.

50Hz : 1300rpm. over, 60Hz : 1500rpm. over

Spin timer

Mechanical type, 0~5min.

Motor type

4-pole single phase condenser induction motor

AC 220V, 50Hz

150W

AC 240V, 50Hz

150W

AC 110~120V, 60Hz

150W

AC 127V, 60Hz

150W 

AC 127/220V, 60Hz

165W / 170W(60Hz) / 135W(50Hz)

Motor output

40W

System

Centrifugal extraction system

Wash tub

Material

Polypropylene resin

Water level

H : 61

, M : 54

, L : 46

Wash timer

Electrical type, 0~15min.

Pulsator revolution

50Hz : about 120rpm.,   60Hz : about 140rpm.

Motor type

4-pole single phase condenser induction motor

AC220V, 50Hz

320W

AC240V, 50Hz

400W

AC110~120V, 60Hz

430W

AC127V, 60Hz

AC127/220V, 60Hz

460W / 370W(60Hz), 320(50Hz)

Motor output

90W

System

Swirl system

MODEL

WP-850Q(P),WP-860Q(P), WP-850G(P), WP-860G(P) 

WP-850N(P), WP-860N(P)

Dimensions (WxDxH)

WP-850** : 820x482x970(mm)

WP-860** : 820x482x982(mm)

Net weight

Non pump Model : 31.5kg

Pump Model : 33kg

Power source

Single

AC110V, 60Hz / AC 120V, 60Hz

AC 220V, 50Hz / AC 240V, 50Hz

AC 220V, 60Hz

Dual

AC 110~127 / 220V, 50/60 Hz

"GENTLE " 

0.8 sec. ON - 1.5sec. OFF

1.8 sec. ON - 3.0sec. OFF

"NORMAL"

1.0 sec. ON - 1.3sec. OFF

2.6 sec. ON - 2.2sec. OFF

"STRONG"

1.2 sec. ON - 1.1sec. OFF

3.6 sec. ON - 1.2sec. OFF

Adjustable leg (Option)

Turn the adjustable legs to set the washer horigon tal (2EA) 

-4-

Power
consumption
(Rated input)

Power
consumption
(Rated input)

Spin dryer
basket

Wash selector

(Reversible)

WASH

DO

N'T

RO

TA

TE

G

E

N

T

LE

NORMAL ST

R

O

N

G

O

FF

WA

SH-RINSE

D

R

A

IN

SPIN TIMER

DRAIN SELECTOR

WASH SELECTOR

WATER SELECTOR

WASH TIMER

DO

N'T

ROTAT

E

2

3

1

4

5

6

DO

N'T

RO

TA

TE

G

E

N

TL

E

NORMAL

ST

R

O

N

G

WA

SH-RINSE

D

R

A

IN

SPIN TIMER

DRAIN SELECTOR

WASH SELECTOR

WATER SELECTOR

WASH TIMER

SPIN

DO

N'T

ROTAT

E

2

3

1

4

5

6

-5-

2

3

5

7

8

9

10

11

12

13

14

(for pump model)

12

6

4

1

(1) Panel
(2) Washing cover
(3) Supply selector lever
(4) Overflow filter
(5) Wash tub
(6) Pulsator(with punch+3 more)
(7) Spin dryer cover

• Spinning will stop if the cover is opened

during operation.

• Spinning will not start unless the cover is

closed.

(8) Safety cover-2
(9) Spin dryer basket
(10) Safety cover-1
(11) Earth wire

(only on models with a two-prong plug)

(12) Drain hose
(13) Power cord
(14) Adjustable leg (Option)

(1) Water supply inlet: Connect the inlet hose from the water faucet to feed water to the tub.
(2) Wash timer: Select the desired time for washing or rinsing.
(3) Wash selector: Set the selector to "GENTLE", "NORMAL", "STRONG" according to kinds and quantity of the

laundry.

(4) Drain selector

• Non pump model : Select "WASH-RINSE" for washing and rinsing, and "DRAIN" to drain the water out of the wash

tub.

• Pump model : Select "WASH-RINSE" for washing and rinsing with an overflow drain, and "DRAIN" to drain the

water out of the wash tub, and "OFF" to turn off the drain pump.

(5) Spin timer: Select the desired time for spinning.
(6) Water selector: Set the supply select lever to "WASH" for washing and rinsing, to "SPIN" for interim spin rinse.

-6-

1. Remove the screws fastening the back cover and

remove the back cover(Fig. 1).

Before attempting to replace or adjust any
part of the washing machine, disconnect the
electrical power supply from the wall outlet.

• When replacing the panel assembly, fix the

plunger valve strap properly.

• Securely solder connecting lead wires, or

used connectors and insulate well to
prevent overheating.

2. Remove the vinyl tape fastening the lead wires

closed connector to the plunger valve assembly and
disconnect the lead wires(Fig. 2).

4. Remove the screws fastening the panel(Fig. 4).

5. Lift up the panel assembly and lay it down on the

top(Fig. 5).

To assemble the panel assembly, reverse the
disassembly procedure.

3. Disconnect the plunger valve strap from the plunger

valve rod(Fig. 3).

Plunger valve strap

Rod

Fig. 1

Fig. 2

Fig. 4

Fig. 3

Fig. 5

Fig. 6

Fig. 7

Fig. 8

❒  

1. Pull out the knobs(Fig. 6)

3. Remove the switch body from the panel.

4. Push the supply selector guide in the direction of

the arrow(Fig. 8).

To assemble the water supply system to the switch
body, reverse the above disassembly procedure.

2. Pull out the supply select hose from the supply

select guide(Fig. 7).

Supply select guide

-7-

2. Remove the screws and separate the switch body

from the panel(Fig. 10).

4. Remove the spin timer by pushing the claw holding

the spin timer in the direction of the arrow(Fig. 11).

To assemble the timers to the switch body, reverse
the disassembly procedure.

❒  

1. Pull out the terminals and remove the screw

fastening the mini switch(Fig. 14).

2. Separate the mini switch from the switch body(Fig. 14).

To assemble the mini switch to the switch body,
reverse the disassembly procedure.

Fig. 10

Fig. 9

Fig. 11

Fig. 14

❒  

1. Pull out the knobs(Fig. 9)

To assemble the drain select arm to the switch body,
reverse the disassembly procedure.

❒ 

1. Disconnect the plunger valve strap from the drain

select arm(Fig. 12).

2. Lift the drain select arm in the direction of arrow and at

the same time rotate the drain select arm in the direction
of the white arrow until the hook of the drain select arm
matches the groove of the switch body(Fig. 13).

Drain select arm

Plunger valve strap

The Hook of 

Drain Select Arm

The Groove of 

Switch Body

Fig. 12

Fig. 13

Back side

Front side

3. Remove the screw fastening the cycle timer, pull

out the terminals from the buzzer and remove the
cycle timer(Fig. option1).

Fig. option