DOWNLOAD LG WP-1510RT Service Manual ↓ Size: 4.29 MB | Pages: 26 in PDF or view online for FREE

Model
WP-1510RT
Pages
26
Size
4.29 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wp-1510rt.pdf
Date

LG WP-1510RT Service Manual ▷ View online

-7-
2. Remove the screws and separate the switch body
from the panel(Fig. 10).
3. Remove the spin timer by pushing the claw holding
the spin timer in the direction of the arrow(Fig. 11).
To assemble the timers to the switch body, reverse
the disassembly procedure.
❒  
Mini Switch replacement
(Pump model only)
1. Pull out the terminals and remove the screw
fastening the mini switch(Fig. 14).
2. Separate the mini switch from the switch body(Fig. 14).
To assemble the mini switch to the switch body,
reverse the disassembly procedure.
Fig. 10
Fig. 9
Fig. 11
Fig. 14
❒  
Timer replacement
1. Pull out the knobs(Fig. 9)
To assemble the drain select arm to the switch body,
reverse the disassembly procedure.
❒ 
Drain Select Arm replacement
1. Disconnect the plunger valve strap from the drain
select arm(Fig. 12).
2. Lift the drain select arm in the direction of arrow and at
the same time rotate the drain select arm in the direction
of the white arrow until the hook of the drain select arm
matches the groove of the switch body(Fig. 13).
Drain select arm
Plunger valve strap
The Hook of 
Drain Select Arm
The Groove of 
Switch Body
Fig. 12
Fig. 13
Back side
Front side
4. Remove the screw fastening the cycle timer, pull
out the terminals from the buzzer and remove the
cycle timer(Fig. option1).
Fig. option
-8-
4-2. Spin Dryer Cover replacement
After removing the back cover, the panel assembly,
proceed as follows:
1. Open the spin dryer cover and separate  brake wire
strap from the brake wire assembly (Fig. 15).
Brake wire starp
Brake wire assembly
4-3. Spin Dryer Basket Assembly
replacement
After removing the back cover, proceed as follows:
1. Take hold of the front of the safety cover-1. 
2. Pull the tub by the other hand.
3. Pull the safety cover-1 upward.(fig. 18)
Safety cover-1
Safety cover-2
 Spin dryer cover
2. Remove the Q-spring(Fig. 16).
3.Remove the screw fastening the door switch and
remove the door switch(Fig. 16).
4. Remove the spin dryer cover by widening between the
hinge hole of the tub and the hinge of the spin dryer
cover and pulling up the spin dryer cover(Fig. 17).
5. Loosen the fixing bolt of the coupling assembly
fastening the spin shaft(Fig. 19).
6. Pull out completely the spin basket assembly(Fig. 20).
To assemble the spin dryer cover assembly, reverse
the disassembly procedure.
To assemble the spin dryer basket assembly, reverse
the disassembly procedure.
Fig.15
Fig. 16
Fig.17
Fig. 18
Fig. 19
Fig. 20
25 mm
-9-
4-4. Spin Motor replacement
After removing the back cover, opening the spin dryer
cover, and removing the spin dryer basket, proceed
as follows:
1. Remove the brake wire holder-A in the direction of
the arrow.(Fig. 21).
Brake wire assembly
2. Separate the brake wire assembly from the brake
wire holder.(Fig.22)
7. Hold the spin motor and remove the three hooks
from the base(Fig. 25).
8. Remove the spin motor.
9. Remove the screws fastening the vibration damper
assemblies and remove the vibration damper
assemblies(Fig. 26).
3. Take out the brake wire assembly from the brake
assembly.(Fig. 23)
4. Disconnect the lead wires and remove the V-belt.
5. Lay the washing machine on its front side on a
blanket or cardboard.
6. Remove the screws fastening the base and remove
the base from the outcase(Fig. 24).
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Jig Push
-10-
Fig. 28
Fig. 29
Fig. 32
Fig. 30
Fig. 31
Lower bolt
Fig. 27
10. Loosen the fixing bolt fastening the motor shaft
and pull up the coupling assembly(Fig. 27).
2. Disconnect the lead wires.
3. Lay the washing machine on its front side on a
blanket or cardboard.
4. Remove the screws fastening the base and remove
the base from the outcase(Fig. 30).
5. Remove the screws and the washers, remove the
wash motor and remove the wash motor
damper(Fig. 31).
6. Loosen the socket bolt of the motor pulley
assembly and pull up the motor pulley assembly
from the motor.
To assemble the wash motor, reverse disassembly
procedure.
11. Remove the screws fastening the brake assembly
and remove the brake assembly(Fig. 28).
To assemble the spin motor, reverse the disassembly
procedure.
4-5. Wash Motor replacement
After removing the back cover and the spin dryer
basket, proceed as follows:
1. Remove the V-belt from the pulsator pulley(Fig. 29).
Page of 26
Display

Click on the first or last page to see other WP-1510RT service manuals if exist.