LG WM3632HW Service Manual ▷ View online
33
Clamp Assembly
5.
Open the Door.
6.
Disassemble the Clamp Assembly using
a flat (–) screwdriver.
7.
Separate the Clamp Assembly from the
Cabinet Cover.
8.
Tilt the Cabinet Cover.
9.
Disconnect the Door Switch Connector.
10.
Lift and separate the Cabinet Cover.
11.
Remove 1 screw from Bracket.
12.
Disassemble the Clamp Assembly using
a flat (–) screwdriver.
a flat (–) screwdriver.
13.
Disassemble the Gasket.
34
1.
Open the Door.
2.
Unscrew the 7 screws from the Hinge Cover.
3.
Put a flat (–) screwdriver into the opening of the
Hinge, and pull out the
H
inge Cover.
4.
Unscrew the screws from the Door.
5.
Disassemble the Door upward/downward.
1.
Open the Door.
2.
Disassemble the Clamp Assembly.
3.
Unscrew the 2 screws from Cabinet Cover.
Be careful ! The door is heavy.
35
1.
Disassemble the Cabinet Cover.
2.
Separate the Pump Hose, the Bellows
and the Circulation Hose Assembly from the
pump assembly.
pump assembly.
3.
Disassemble the Pump Assembly as shown.
1.
Disassemble the Cabinet Cover.
2.
Separate 2 connectors from the Heater.
3.
Loose the nut and pull out the Heater.
1.
Disassemble the Cabinet Cover.
2.
Unplug the White Connector from the
Thermistor.
3.
Pull it out by holding the bracket of Thermistor.
CAUTION
• When assembling the Heater, insert the Heater
into Heater Clip on the bottom of the tub.
• Tighten the fastening nut so the Heater
is secure.
36
1.
Disassemble the Cabinet Cover.
2.
Separate the Heater from the Tub.
3.
Remove any foreign objects (wire, coins, etc.)
by inserting a long bar in the opening.
1.
Unscrew the 4 screws from the Back Cover.
2.
Unscrew the single screw from the lower-right
side of the Cabinet.
3.
Disconnect the Connector from PWB Harness.
Click on the first or last page to see other WM3632HW service manuals if exist.