LG WM3360HVCA Service Manual ▷ View online
56
WHEN FOREIGN OBJECT IS STUCK BETWEEN DRUM AND TUB
Disassemble the cabinet cover.
Separate the heater from the tub.
Remove any foreign objects (wire, coin, etc.)
by inserting a long bar in the opening.
LAMP ASSEMBLY
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as
shown.
TOP PLATE ASSEMBLY
1
2
3
1
Disconnect the connector.
3
2
57
MOTOR/DAMPER
NOTE
• If you pull the dampers apart, the must be
replaced. If you do not separate them, they
can be re-used.
Bolt
Rotor
DAMPER
HINGE,
DAMPER
Disassemble the back cover.
Remove the bolt.
Pull out the rotor.
1
2
3
Unscrew the 2 screws from the tub bracket.
Remove the 6 bolts on the stator.
Unplug the 2 connectors from the stator.
1
2
3
Disassemble the damper hinges from the tub
and base.
1
58
Checking the TSG (TURBO STEAM GENERATOR)
TSG (TURBO STEAM GENERATOR)
To check out the fault diagnosis of TSG, you
can pull out the plug and let the water drain
away.
1
Be cautious in case of the TSG is hot.
2
Remove the housing attached to the TSG.
(Heater, Water level frequency-sensor,
Thermistor.)
1
Remove the screw of the TSG and body frame.
2
59
Body Frame
Remove the screws from both ends of the
frame rail.
3
Separate the hoses from the TSG.
4
Remove the body frame and then separate the
TSG from the washer.
5
Click on the first or last page to see other WM3360HVCA service manuals if exist.