LG WM3070HVA Service Manual ▷ View online
54
CABINET COVER
Unscrew the 5 screws from upper of the
cabinet cover.
Unscrew the screw from the filter cover.
Put a flat ( - ) screwdriver or putty knife into the
hinge slots at the bottom of the cover and pry
it out.
Unscrew the screw from the lower side of the
cabinet cover.
1
2
3
4
55
Open the door.
Disassemble the clamp assembly.
Tilt the cabinet cover.
Disconnect the door switch connector.
Disassemble the clamp assembly.
Disassemble the gasket.
Lift and separate the cabinet cover.
આ
NOTE : When assembling the
cabinet cover, connect the door switch
connector.
5
6
7
8
9
10
11
56
DOOR
Open the door.
Unscrew the 4 screws from the hinge.
(Use the 8mm tool.)
DOOR LOCK SWITCH ASSEMBLY
Open the door and remove the gasket using
the special gasket pliers.
Unscrew the 2 screws.
Disassemble the door upward.
આ
NOTE
• Reconnect the connector after replacing
the door switch assembly.
1
3
1
2
2
57
PUMP
Disassemble the cabinet cover.
Separate the pump hose, the bellows, the
circulation hose assembly from the pump
assembly.
Disassemble the pump assembly.
HEATER
Disassemble the cabinet cover.
Separate 2 connectors from the heater.
Loosen the nut and pull out the heater.
THERMISTOR
Disassemble the cabinet cover.
Unplug the white connector from the
thermistor.
Pull it out by holding the bracket of the
thermistor.
આ
CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
• Tighten the fastening nut so the heater is
secure.
CIRCULATION
HOSE
PUMP HOSE
BELLOWS
1
2
3
1
2
3
1
2
3
Click on the first or last page to see other WM3070HVA service manuals if exist.