LG WM3050CW Service Manual ▷ View online
12
• This display shows:
a) the estimated time remaining
in the cycle when operation.
b) an error code when an error
has been detected.
• Rotate the cycle selector knob
to select the cycle designed for
different types of fabric and
soil level.
• Use this button to
start/stop the
washer.
• Select a water temperature based on the type of load you are washing.
• To change the spin speed, press the Spin Speed button repeatedly
to cycle through available options.
• To change the soil level, press the Soil Level button repeatedly until
the desired setting is on.
•
Prewash: Use this option for loads that need
pretreatment. It adds 16 minutes prewash and drain.
•
Rinse + Spin: Use this option to rinse and then spin.
•
EXTRA RINSE: Select this option to rinse and
spin a load separately from a regular cycle.
•
DELAY WASH: Once you have selected the cycle
•
WATER PLUS:Select this option to add extra
water to the wash and rinse cycles for superior
results, especially with large or bulky items
start of the wash cycle.
and other settings, press this button to delay the
.
• Use this button to turn
power
On/Off.
CUSTOM PROGRAM, COLDWASH™
• COLDWASH™ : Use this function to wash without hot water and heating.
• CUSTOM PROGRAM allows you to store a customized wash cycle
for future use.
• Light whenever the door of the washer is locked.
• The door can be unlocked by pressing the
Start/Pause
button to stop the washer.
5. OPERATION
EST. TIME REMAINING
DOOR LOCKED lamp
POWER button
START/PAUSE button
OPTION button
CYCLE SELECTOR
Wash/temp., Spin speed, Soil Level
13
6. WIRING DIAGRAM
/
PROGRAM CHART
*
*
Cool-down
**Approx.
(Minutes)
* Wash time is in minutes.
** The total working time will vary with the load size,
** The total working time will vary with the load size,
water temperature and ambient temperature.
Normal
Bulky
/Large
Hand Wash
/Wool
Baby Wear
25
98
51
57
55
40
57
55
40
111
40
20
13
13
18
70
WASH
1 2
1 2
1 2
INLET VALVE
WH
1 2 3 4 5 6
1 2 3
1 2 3
1 2 3
4
1 2 3 4
1 2 3 4
2 1
2 1
2 1
2 1
5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4
1 2 3 4
3 2 1
3 2 1
1 2 3
1 2 3
4
4
MOTOR
PRESSURE
SENSOR
SENSOR
THERMISTOR
POWER
CORD
CORD
+HOUSING
3 2
3 2 1
3 2 1
1
1 2
1
1
U V W
2 3
3
1 2
1 2 3
1 2 3
3
4 3
4 3 2
4 3 2
2
1
1
1 2
1 2 3
1 2 3
3
5 4
5 4 3
5 4 3
3 2
2 1
1
a
H
b
H
D
N
G
1 2
1 2
1 2
1 2
/
NOISE
FILTER
1 2 3
1 2 3
3 2 1
3 2 1
DOOR LOCK
4
SOLE
NOID
3
2
1
2
3
4
5
/
E
S
U
F
E
S
U
F
14
7. TROUBLESHOOTING
7-1. BEFORE PERFORMING SERVICE
■
Be careful of electric shock when disconnecting parts while troubleshooting.
■
The voltage of each terminal is 120 V AC and DC when the unit is plugged in.
7-2. QC TEST MODE.
The washer must be empty and the controls must be in the off state.
1. Press the WASH/RINSE and SPIN SPEED buttons simultaneously.
2. Press the Power button, while the above condition. Then buzzer will sound twice.
3. Press the Start/Pause button repeatedly to cycle through the test modes.
1. Press the WASH/RINSE and SPIN SPEED buttons simultaneously.
2. Press the Power button, while the above condition. Then buzzer will sound twice.
3. Press the Start/Pause button repeatedly to cycle through the test modes.
7-3. HOW TO CHECK THE WATER LEVEL FREQUENCY
Number of times the
Start/Pause button
is pressed
Check Poin
Display Status
None
1 time
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
1 time
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
Turns on all lamps and locks the door.
Tumble clockwise.
Low speed Spin.
High speed Spin.
Inlet valve for prewash turns on.
Inlet valve for main wash turns on.
Inlet valve for hot water turns on.
Inlet valve for bleach turns on.
Tumble counterclockwise.
Water Temperature (Thermistor)
Drain pump turns on.
Off
Tumble clockwise.
Low speed Spin.
High speed Spin.
Inlet valve for prewash turns on.
Inlet valve for main wash turns on.
Inlet valve for hot water turns on.
Inlet valve for bleach turns on.
Tumble counterclockwise.
Water Temperature (Thermistor)
Drain pump turns on.
Off
rpm (42~50)
rpm (55~65)
rpm (105~115)
Water level frequency (225~265)
Water level frequency (225~265)
Water level frequency (225~265)
Water level frequency(225~265)
rpm (42~50)
Water Temperature [°C]
Water level frequency (225~265)
rpm (55~65)
rpm (105~115)
Water level frequency (225~265)
Water level frequency (225~265)
Water level frequency (225~265)
Water level frequency(225~265)
rpm (42~50)
Water Temperature [°C]
Water level frequency (225~265)
• Press the CUSTOM PROGRAM and PRE-WASH buttons simultaneously.
A display indicating 41 means a water level frequency of 24.1 kHz.
The digits indicate the water level frequency.
15
7-4. ERROR DISPLAY
• If you press the START/PAUSE button when an error is displayed, any error except 『
』will
disappear and the machine will go into the pause status.
• In case of 『
』,
『
』,
『
』if the error is not resolved within 20 sec., or the in case of other errors,
if the error is not resolved within 4 min., power will be turned off automatically and the error code will
blink. But in the case of 『
blink. But in the case of 『
』, power will not be turned off.
ERROR SYMPTOM
CAUSE
WATER INLET
ERROR
• Correct water level (246) is not reached within 8 minutes
after water is supplied or it does not reach the preset water
level within 25 minutes.
level within 25 minutes.
• The load is too small.
• The appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.
• The appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.
1
2
IMBALANCE
ERROR
• Not fully drained within 10 minutes.
3
DRAIN
ERROR
• Water is overflowing (water level frequency is over 213).
※ If is displayed, the drain pump will operate to
drain the water automatically.
4
OVER FLOW
ERROR
• The SENSOR SWITCH ASSEMBLY is out of order.
5
PRESSURE
SENSOR
ERROR
• Door not all the way closed.
• Loose electrical connections at Door switch and
• Loose electrical connections at Door switch and
PWB Assembly.
• The DOOR SWITCH ASSEMBLY is out of order.
6
DOOR OPEN
ERROR
• The THERMISTOR is out order.
7
HEATING
ERROR
Click on the first or last page to see other WM3050CW service manuals if exist.