LG WM2497HWM Service Manual ▷ View online
36
Disassemble the cabinet cover.
Separate the heater from the tub.
Remove any foreign objects (wire, coin, etc.) by
inserting a long bar in the opening.
TOP PLATE ASSEMBLY
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as shown.
Disconnect the connector.
Disassemble the lamp assembly.
37
Disassemble the back cover.
Remove the bolt.
Pull out the Rotor.
Unscrew the 2 screws from the tub bracket.
Remove the 6 bolts on the stator.
Unplug the 2 connectors from the stator.
Disassemble the damper hinges from the tub
and base.
Separate the dampers.
NOTE
• Once removed, replace the damper with
new one.
38
To check out the fault diagnosis of TSG, in case
of removing the water inside, you can pull out
the plug and let the water drain away.
the plug and let the water drain away.
Be cautious in case of the TSG is hot
temperature.
temperature.
Remove the housing coupled the TSG
(Heater, Water level frequency-sensor,
Thermistor)
(Heater, Water level frequency-sensor,
Thermistor)
Taking out the screw of the TSG and Body
Frame.
Frame.
39
Body Frame
Taking out the screws of Body Frame (2EA)
Separate the hoses from the TSG.
Remove the Body Frame and then, separate the
TSG from the washer
Click on the first or last page to see other WM2497HWM service manuals if exist.