LG WM2450HRA Service Manual ▷ View online
48
DISPENSER ASSEMBLY
Disassemble the top plate assembly.
Pull out the drawer.
Push out the dispenser assembly after
unscrewing 2 screws.
unscrewing 2 screws.
NOISE FILTER
Disassemble two (or three) connectors from
the noise filter.
the noise filter.
Unscrew a screw from the top bracket.
Unscrew the clamp nut at the lower part of the
dispenser.
dispenser.
Unscrew 2 screws from the back of the cabinet.
Disassemble the 4 connectors from the valves.
Wire Color
Blue Housing (YL-BK)
Red Housing (VT-BK)
White Housing (WH-BK)
Blue Housing (GY-BK)
Red Housing (BL-BK)
Red Housing (VT-BK)
White Housing (WH-BK)
Blue Housing (GY-BK)
Red Housing (BL-BK)
1
2
3
3
4
5
5
DRAWER
1
3
2
4
5
6
1
2
49
CABINET COVER
Unscrew the 5 screws from upper of the
cabinet cover.
cabinet cover.
Unscrew the screw from filter cover.
Put a flat ( - ) screwdriver or putty knife into the
hinge slots at the bottom of the cover and pry
it out.
hinge slots at the bottom of the cover and pry
it out.
Unscrew the screw from the lower side of the
cabinet cover.
cabinet cover.
1
2
3
4
50
Open the door.
Disassemble the clamp assembly.
Tilt the cabinet cover.
Disconnect the door switch connector.
Disassemble the clamp assembly.
Disassemble the gasket.
Lift and separate the cabinet cover.
NOTE : When assembling the
CABINET COVER, connect the door switch
connector.
CABINET COVER, connect the door switch
connector.
5
6
7
8
9
10
11
51
DOOR
Open the door.
Unscrew the 4 screws from the hinge.
(Use the 8mm tool.)
(Use the 8mm tool.)
DOOR LOCK SWITCH ASSEMBLY
Open the door and disassemble the CLAMP
ASSEMBLY.
ASSEMBLY.
Unscrew the 2 screws.
Disassemble the door upward.
NOTE
• Reconnect the connector after replacing
• Reconnect the connector after replacing
the DOOR SWITCH ASSEMBLY.
1
3
1
2
2
Click on the first or last page to see other WM2450HRA service manuals if exist.