LG WM2355CW Service Manual ▷ View online
6
2-5. THE DOOR CAN NOT BE OPENED
● While program is operating
● When a power failed and power plug is taken out in operation
● While Door Lock lights turn on.
● While the motor is in the process of intertial rotating, through the operation is paused.
● When a power failed and power plug is taken out in operation
● While Door Lock lights turn on.
● While the motor is in the process of intertial rotating, through the operation is paused.
2-6. DOOR LOCKED LAMP LIGHTS
● When the frequency of water level is lower than 22.9 kHz
(It can be canceled when the frequency is more than 23.8 kHz)
● When the temperature inside the tub is higher than 45 °C and water level is not 25.5 kHz
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40 °C)
2-7. CHILD LOCK
● Use this option to prevent unwanted use of the washer. Press and hold PRE WASH button for 3 seconds to
lock/unlock control.
● When Child lock is set, CHILD LOCK lights and all buttons. You can lock the washer while it is operating.
7
3. PARTS IDENTIFICATION
■ ACCESSORIES
Drum Light
Door Seal
Hose retainer
Hot/Cold (1 each)
Hose
Wrench
for removing shipping bolts
and leveling the washer
and leveling the washer
Tie strap
to secure drain hose to standpipe,
inlet hose, or laundry tub
inlet hose, or laundry tub
Cap (4 each)
to cover the holes created after
removing the shipping bolts
removing the shipping bolts
8
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120 V AC, remove the transit bolts....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
Check the setup (power supply is 120 V AC, remove the transit bolts....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
■ STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE SHIPPING
INSTALL THE APPLIANCE
ADJUST THE
BOLTS
ON A FLAT AND FIRM SURFACE
LEVELING
• Remove the 4 shipping bolts
• Turn the leveling feet to adjust
with the supplied wrench.
the appliance.
※ Do first lower side to remove easily.
• Keep the shipping bolts and
spanner for future use.
• Insert the 4 caps
(provided) into the hole.
• Turn clockwise to raise;
counterclockwise to lower.
4. INSTALLATION & TEST
9
■ HOW TO CONNECT THE INLET HOSE
• Verify that the rubber washer is inside of the
valve connector.
• Tighten the inlet hose securely to prevent leaks.
■ CONNECT THE DRAIN HOSE
■ CONNECT POWER PLUG
※ The end of the drain hose should be placed less than 96” from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices, as
doing so may cause a fire.
· Make sure that the hose is not twisted.
· Avoid submerging the end of the hose.
Click on the first or last page to see other WM2355CW service manuals if exist.