LG WM2350HSC Service Manual ▷ View online
28
①
① Disconnect the SENSOR SWITCH ASSEMBLY.
②
② Remove the Protect Cover.
③
③ Disconnect the connectors.
④
④ Unscrew 1 screw on the back.
⑤
⑤ Disassemble the Main PWB.
PROTECT COVER
MAIN PWB ASSEMBLY
29
①
① Disassemble the top plate assembly.
②
②
② Pull out the drawer.
③
③
③ Push out the DISPENSER ASSEMBLY after
unscrew 2 screws.
④
④ Unscrew the nut at the lower part of the dispenser.
⑤
⑤ Disassemble the 4 connectors from the valves.
⑥
⑥ Unscrew 2 screws from the back of the cabinet.
①
① Disassemble two (or three) connectors from
the NOISE FILTER.
②
② Unscrew a screw from the TOP BRACKET.
DISPENSER ASSEMBLY
NOISE FILTER
※
※ Wire Color
①
①
① Blue Housing (YL-BK)
②
②
② White Housing (WH-BK)
③
③
③ Blue Housing (GY-BK)
④
④
④ Red Housing (BL-BK)
30
①
① Unscrew the 5 screws from upper of the canbinet
cover.
②
② Unscrew the screw from filter cover.
③
③ Put a flat ( - ) screwdriver or putty knife into the both
sides of the filter cover, and pull it out.
④
④ Unscrew the screw from the lower side of the cabinet
cover.
CABINET COVER
31
⑤
⑤ Open the door.
⑥
⑥
⑥ Disassemble the clamp assembly.
⑦
⑦ Tilt the cabinet cover.
⑧
⑧
⑧ Disconnect the door switch connector.
※
※ NOTE: When assembling the CABINET
COVER, connect the connector.
⑨
⑨ Lift and separate the cabinet cover.
⑩
⑩ Disassemble the clamp assembly.
⑪
⑪
⑪ Disassemble the Gasket.
Click on the first or last page to see other WM2350HSC service manuals if exist.