LG WM2350HNC Service Manual ▷ View online
32
①
① Open the door.
②
②
② Unscrew the 7 screws from the HINGE COVER.
③
③ Put a flat ( - ) screwdriver into the openng of the hinge,
and pull out the hinge cover.
④
④ Unscrew a screw from the lower side of door.
⑤
⑤
⑤ Disassemble the door upward.
DOOR
①
① Open the door and disassemble the CLAMP
ASSEMBLY.
②
② Unscrew the 2 screws.
DOOR LOCK SWITCH ASSEMBLY
※
※ Be careful! The door is heavy.
※
※ NOTE
• Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
33
PUMP
HEATER
①
①
Disassemble the cabinet cover.
②
②
Separate the pump hose, and the bellows.
③
③
Disassemble the pump assembly in arrow
direction.
①
①
Disassemble the cabinet cover.
②
②
Separate 2 connectors from the heater.
③
③
Loosen the nut and pull out the heater.
※
※
CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
• Tighten the fastening nut so the heater is
secure.
34
34
MOTOR/DAMPER
①
①
Disassemble the back cover.
②
②
Remove the bolt.
③
③
Pull out the Rotor.
①
①
Unscrew the 2 screws from the tub bracket.
②
②
Remove the 6 bolts on the stator.
③
③
Unplug the 2 connectors from the stator.
①
①
Disassemble the damper hinges from the tub
and base.
②
②
Separate the dampers.
※
※ NOTE
• Once removed, replace the damper with
new one.
35
A450
A485
A455
A152
A111
A110
A150
A154
A140
A310
A303
A300
A200
A155
A440
A430
A100
A101
A133
A130
A151
A153
A131
A201
A220
F110
F215
F210
A105
A106
A104
A102
A103
A390
A141
1
1-1. CABINET & CONTROL
PANEL ASSEMB LY
11. EXPLODED VIEW
A410
A175
Printed materials
Description
*Owner’s Manual
*Energy Label
Loc No.
*Service Manual
*Wiring Diagram
*Quick Start Guides
*Installation Sheet
G001
G002
G004
G004
G005
G006
G007
“The following parts are not illustrated"
*Non-Skid pads
G010
A156
Click on the first or last page to see other WM2350HNC service manuals if exist.