LG WM2016CW Service Manual ▷ View online
12
EST. TIME REMAINING
• This display shows:
a) the estimated time remaining
in the cycle when operation.
b) an error code when an error
has been detected.
a) the estimated time remaining
in the cycle when operation.
b) an error code when an error
has been detected.
CYCLE SELECTOR
• Rotate the cycle selector knob
to select the cycle designed for
different types of fabric and
soil level.
to select the cycle designed for
different types of fabric and
soil level.
START/PAUSE button
• Use this button to
start/stop the washer.
start/stop the washer.
Wash, Rinse temp., Spin speed, Soil Level, Beeper Button.
• Select a water temperature based on the type of load you are washing.
• To change the spin speed, press the Spin Speed button repeatedly
to cycle through available options.
• To change the soil level, press the Soil Level button repeatedly until
the desired setting is on.
• Press Repeatedly to adjust the Volume
• To change the spin speed, press the Spin Speed button repeatedly
to cycle through available options.
• To change the soil level, press the Soil Level button repeatedly until
the desired setting is on.
• Press Repeatedly to adjust the Volume
OPTION button
• Prewash: Use this option for loads that need
pretreatment.
It adds 16 minutes prewash and drain.
• Rinse + Spin: Use this option to rinse and
then spin.
• Quick Cycle: The Quick offers a quick cycle
time.
• Stain Cycle: Add time to the wash and rinse
for better stain removal. Automatically provide a rinse.
• Tub Clean:?( Use this option to clean tub.)
pretreatment.
It adds 16 minutes prewash and drain.
• Rinse + Spin: Use this option to rinse and
then spin.
• Quick Cycle: The Quick offers a quick cycle
time.
• Stain Cycle: Add time to the wash and rinse
for better stain removal. Automatically provide a rinse.
• Tub Clean:?( Use this option to clean tub.)
POWER button
• Use this button to turn
power On/Off.
power On/Off.
Delay Wash, Water Plus/*Spinsense, Extra Rinse
• Delay Wash allows the start of any cycle to be delayed for 1~9 hours
• Water Plus adds extra water to the wash and rinse cycles for
superior results
• Extra rinse Provides an additional rinse
• Water Plus adds extra water to the wash and rinse cycles for
superior results
• Extra rinse Provides an additional rinse
DOOR LOCKED lamp
• Light whenever the door of the washer is locked.
• The door can be unlocked by pressing the Start/Pause
button to stop the washer.
• The door can be unlocked by pressing the Start/Pause
button to stop the washer.
Cycle
Fabric type
Spin Speed
Soil
Level
Wash/Rinse
Temp.
Pre-
Wash
Rinse +
Spin
Extra
Rinse
Stain
Cycle
Water
Plus
Quick
Cycle
Cotton/
Towels
Cotton, linen,
towels, shirts,
sheets
towels, shirts,
sheets
Warm/Cold
No Spin
Low
Medium
High
Extra High
Heavy
Light
Normal
Perm
Press
Dress shirts/
pants, wrinkle free
clothing,poly/
cotton blend
clothing, table cloths
pants, wrinkle free
clothing,poly/
cotton blend
clothing, table cloths
Warm/Cold
High
No Spin
Low
Warm/Warm
Hot/Cold
Tap Cold/Cold
Cold/Cold
Medium
Heavy
Light
Normal
Normal
mixed loads,
work clothes,
jeans, shirts
work clothes,
jeans, shirts
Warm/Cold
Warm/Warm
Hot/Cold
Tap Cold/Cold
Cold/Cold
Warm/Warm
Hot/Cold
Tap Cold/Cold
Cold/Cold
High
Heavy
Light
Normal
Delicates
Dress shirts/
blouses nylons,
sheer or
lacy garment
blouses nylons,
sheer or
lacy garment
Cold/Cold
No Spin
Low
Warm/Cold
Warm/Warm
Tap Cold/Cold
Medium
Heavy
Light
Normal
Hand
Wash
Items labeled
“hand washable”
“hand washable”
Cold/Cold
Medium
No Spin
Warm/Cold
Warm/Warm
Tap Cold/Cold
Low
Light
Normal
Extra High
No Spin
Low
Medium
13
5-2. CYCLE GUIDE
Select cycles designed for different types of fabric and soil levels.
14
5-3. SPECIAL FUNCTIONS
The option buttons also activate special functions, including CHILD LOCK, TUB CLEAN, and SPIN SENSE.
CHILD LOCK
Use this option to prevent unwanted use of the washer or to keep cycle settings from being
changed while the washer is operating. Press and hold the OPTION button for 3 seconds to
activate or deactivate CHILD LOCK. CL will be shown in the display, and all controls are
disabled except the ON/OFF button. The washer can be locked during a cycle.
changed while the washer is operating. Press and hold the OPTION button for 3 seconds to
activate or deactivate CHILD LOCK. CL will be shown in the display, and all controls are
disabled except the ON/OFF button. The washer can be locked during a cycle.
TUB CLEAN
Remove any clothing or items from the washer and close the door. Open the dispenser drawer
and add liquid chlorine bleach to the bleach compartment.
NOTE : Do not add any detergent to the detergent compartments. Excessive suds may
be produced and leak from the washer.
Close the dispenser drawer slowly. Power on the machine, press the OPTION button and then
select the TUB CLEAN. Press the Start/Pause button to start. After the cycle is complete,
leave the door open to dry around the washer door opening, door seal and door glass.
and add liquid chlorine bleach to the bleach compartment.
NOTE : Do not add any detergent to the detergent compartments. Excessive suds may
be produced and leak from the washer.
Close the dispenser drawer slowly. Power on the machine, press the OPTION button and then
select the TUB CLEAN. Press the Start/Pause button to start. After the cycle is complete,
leave the door open to dry around the washer door opening, door seal and door glass.
CAUTION : If there are small children in the house, care must be taken so that they
can not climb into or play inside the washer while it is open for drying.
can not climb into or play inside the washer while it is open for drying.
SPIN SENSE
SPINSENSE can be used when there is a vibration problem, especially on wood floor
installations. To operate SPINSENSE press and hold the WATER PLUS button for 3 seconds
when the washing machine is running on any cycle. When SPINSENSE has been selected,
the SPIN SPEED button light will blink on and off continually to indicate that the SPINSENSE
function has been selected. Push and hold the WATER PLUS button again for 3 seconds to
cancel SPINSENSE. Once SPINSENSE has been selected, if will continue to function even if
interrupted by a power failure. SPINSENSE option cannot be selected during the spinning
cycle.
installations. To operate SPINSENSE press and hold the WATER PLUS button for 3 seconds
when the washing machine is running on any cycle. When SPINSENSE has been selected,
the SPIN SPEED button light will blink on and off continually to indicate that the SPINSENSE
function has been selected. Push and hold the WATER PLUS button again for 3 seconds to
cancel SPINSENSE. Once SPINSENSE has been selected, if will continue to function even if
interrupted by a power failure. SPINSENSE option cannot be selected during the spinning
cycle.
5-4. EXPLANATION OF EACH PROCESS
15
No.
Process
Explanation
1.
Stay
• Electrical power is supplied
• Washer is ready to work and the micom is in the active mode.
• Washer is ready to work and the micom is in the active mode.
2.
Water
supply
supply
• After loading laundry and selecting a course and a cycle, water is
supplied and drum rotates.
• When a user selects Pre-wash course, water is supplied through
pre wash valve.
3.
Soaking
& washing
laundry
& washing
laundry
• To get laundry wet, drum rotates clockwise and counterclockwise.
• If water amount is insufficient at this time, the Inlet valve will supply
• If water amount is insufficient at this time, the Inlet valve will supply
water again.
4.
Washing
• Fuzzy Logic decides washing time according to the laundry load, water
temperature, and other factors.
5.
Drainage
• A pump motor drains the water from the drum.
• After sensing drained water amount by water level frequency, spin starts.
• When a heating course is selected, stay cooling process is performed to
• After sensing drained water amount by water level frequency, spin starts.
• When a heating course is selected, stay cooling process is performed to
decrease the water temperature gradually to prevent laundry from being
damaged and for safety reasons.
damaged and for safety reasons.
6.
Untangling
(Sensing
eccent-
ricity)
(Sensing
eccent-
ricity)
• It balances laundry load and senses the eccentricity of the load, to only
allow spinning without vibration
• If the eccentricity is worse than the allowed level, it repeats the
disentangling process. When the repeated time is more than allowed
level, it displays UE.
level, it displays UE.
• If the eccentricity is good, the intermittent spin starts.
• During this process, the drain pump works for drainage intermittently.
• During this process, the drain pump works for drainage intermittently.
Click on the first or last page to see other WM2016CW service manuals if exist.