LG WM2010CW Service Manual ▷ View online
4
2. FEATURES & TECHNICAL EXPLANATION
2-1. FEATURES
■ Direct Drive System
The advanced Brushless DC motor directly drives the drum without
belt and pulley.
belt and pulley.
■ Tilted Drum and Large Door Opening
Tilted drum and large opening make it possible to load
and unload clothing more easily.
■ Time-Released Dispenser
Detergent, fabric softener and bleach are dispensed separately at
the right time during wash cycle.
the right time during wash cycle.
■ Automatic Wash Load Detection
Automatically detects the load and optimizes the washing time.
■ Child Lock
The Child lock prevents children from pressing any button to
change the settings during operation.
change the settings during operation.
추가선택, 예약,
5
5
2-2. NEURO FUZZY WASHING TIME OPTIMIZATION
To get the best washing performance, optimal time is determined by the water temperature,
the selected washing temperature, and the size of the load.
2-3. WATER LEVEL CONTROL
● This model incorporates a pressure sensor which can sense the water level in the tub.
● The water supply is stopped when the water level reaches the preset level, the washing
● The water supply is stopped when the water level reaches the preset level, the washing
program then proceeds.
● Spinning does not proceed until the water in the tub drains to a certain level.
2-4. DOOR CONTROL
● The door can be opened by pulling the door handle whenever washer is not in operation.
● When the cycle is completed, the DOOR LOCKED light will turn off.
● If a power failure has occurred while in operation, the door will unlock after 5 minutes.
● Clicking sounds can be heard when the door is locked/unlocked.
● When the cycle is completed, the DOOR LOCKED light will turn off.
● If a power failure has occurred while in operation, the door will unlock after 5 minutes.
● Clicking sounds can be heard when the door is locked/unlocked.
NEURO-
FUZZY
load
size
selected
washing
temperature
water
temperature
washing time
rinsing time
spin rhythm, time
the best
washing
performance
washing
performance
SENSING
PROCESSING
DETERMINATION
EFFECT
6
2-5. THE DOOR CAN NOT BE OPENED
● While program is operating
● When a power failed and power plug is taken out in operation
● While Door Lock lights turn on.
● White the motor is in the process of intertial rotating, through the operation is paused.
● When a power failed and power plug is taken out in operation
● While Door Lock lights turn on.
● White the motor is in the process of intertial rotating, through the operation is paused.
2-6. DOOR LOCKED LAMP LIGHTS
● When the frequency of water level is lower than 22.9 kHz
(It can be canceled when the frequency is more than 23.8 kHz)
● When the temperature inside the tub is higher than 45 °C and water level is not 25.5 kHz
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40 °C)
2-7. CHILD LOCK
● Use this option to prevent unwanted use of the washer. Press and hold OPTION button for 3 seconds to
lock/unlock control.
● When Child lock is set, “ ” blinks and all buttons are disabled except the Power button. You can lock
the washer while it is operating.
7
3. PARTS IDENTIFICATION
身
身
粁? 桁
桁
?
粁
ACCESSORIES
Wrench
Tie strap (Option)
to secure drain hose to standpipe,
inlet hose, or laundry tub
Hot/Cold (1 each)
Hose
Non-skid pads
Caps(4)
(for covering shipping
bolt holes)
Elbow Bracket
(for securing drain hose)
Click on the first or last page to see other WM2010CW service manuals if exist.