LG WM1873FDS Service Manual ▷ View online
49
FOR AUTHORIZED SERVICE TECHNICIAN
DOOR
Open the door.
Unscrew the 4 screws from the hinge.
(Use the 8mm tool.)
(Use the 8mm tool.)
DOOR LOCK SWITCH ASSEMBLY
Open the door and remove the gasket using
the special gasket pliers.
the special gasket pliers.
Unscrew the 2 screws.
Disassemble the door upward.
NOTE
• Reconnect the connector after replacing
• Reconnect the connector after replacing
the door switch assembly.
1
3
1
2
2
50
FOR AUTHORIZED SERVICE TECHNICIAN
PUMP
Disassemble the cabinet cover.
Separate the pump hose, the bellows, the
circulation hose assembly from the pump
assembly.
Disassemble the pump assembly.
Separate the pump hose, the bellows, the
circulation hose assembly from the pump
assembly.
Disassemble the pump assembly.
HEATER & THERMISTOR
Disassemble the cabinet cover.
Separate 2 connectors from the heater.
Loosen the nut and pull out the heater.
Separate 2 connectors from the heater.
Loosen the nut and pull out the heater.
CAUTION
• When assembling the heater, insert the
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
the tub.
• Tighten the fastening nut so the heater is
secure.
CIRCULATION
HOSE
PUMP HOSE
BELLOWS
1
2
3
1
2
3
2
3
51
FOR AUTHORIZED SERVICE TECHNICIAN
WHEN FOREIGN OBJECT IS STUCK BETWEEN DRUM AND TUB
Disassemble the cabinet cover.
Separate the heater from the tub.
Remove any foreign objects (wire, coin, etc.)
by inserting a long bar in the opening.
Separate the heater from the tub.
Remove any foreign objects (wire, coin, etc.)
by inserting a long bar in the opening.
LAMP ASSEMBLY
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as
shown.
Pull the top plate backward and upward as
shown.
TOP PLATE ASSEMBLY
1
2
3
2
3
1
Disconnect the connector.
3
Disassemble the lamp assembly.
4
2
52
FOR AUTHORIZED SERVICE TECHNICIAN
MOTOR/DAMPER
NOTE
• If you pull the dampers apart, the must be
• If you pull the dampers apart, the must be
replaced. If you do not separate them, they
can be re-used.
can be re-used.
Bolt
Rotor
DAMPER
HINGE,
DAMPER
DAMPER
Disassemble the back cover.
Remove the bolt.
Pull out the rotor.
Remove the bolt.
Pull out the rotor.
1
2
3
2
3
Unscrew the 2 screws from the tub bracket.
Remove the 6 bolts on the stator.
Unplug the 2 connectors from the stator.
Remove the 6 bolts on the stator.
Unplug the 2 connectors from the stator.
1
2
3
2
3
Disassemble the damper hinges from the tub
and base.
and base.
1
Click on the first or last page to see other WM1873FDS service manuals if exist.