DOWNLOAD LG WM1873FDS Service Manual ↓ Size: 9.47 MB | Pages: 56 in PDF or view online for FREE

2-2. NEURO FUZZY WASHING TIME OPTIMIZATION

To get the best washing performance, optimal time is determined by the water temperature,

the selected washing temperature, and the size of the load.

2-3. WATER LEVEL CONTROL

This model incorporates a pressure sensor which can sense the water level in the tub.
The water supply is stopped when the water level reaches the preset level, the washing

program then proceeds.
Spinning does not proceed until the water in the tub drains to a certain level.

washing time

rinsing time

the best

washing

performance

spin rhythm, time

SENSING

EFFECT

PROCESSING

DETERMINATION

The door can be opened by pulling the door handle whenever washer is not in operation.
When the cycle is completed, the DOOR LOCKED light will turn off.
If a power failure has occurred while in operation, the door will unlock after 5 minutes.
Clicking sounds can be heard when the door is locked/unlocked.

2-4. DOOR CONTROL

2-5. THE DOOR CAN NOT BE OPENED

While program is operating.
When a power failed and power plug is taken out in operation.
While Door Lock lights turn on.
White the motor is in the process of inertial rotating, through the operation is paused.

2-6. DOOR LOCKED LAMP LIGHTS

When the frequency of water level is lower than 22.9 kHz.

(It can be canceled when the frequency is more than 23.8 kHz.)

When the temperature inside the tub is higher than 45°C and water level is not 25.5 kHz.

(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40°C.)

2-7. CHILD LOCK

Use this option to prevent unwanted use of the washer. Press and hold Rinse + Spin button for 3
seconds to lock/unlock control.
When child lock is set, CHILD LOCK lights and all buttons are disabled except the POWER
button. You can lock the controls of the washer while washing.
CHILD LOCK lasts after the end of cycle. If you want to deactivate this function,
Press and hold the Rinse + Spin button for 3 seconds. 

2-8. WATER CIRCULATION

When washing and rinsing function of shower at the upper part of Gasket.
When washing, it continuously operates for 3 minutes and intermittently.
When rinsing, it continuously operates after completion of water supply.

NOTE

Contact LG Customer Service at  1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are missing.

For your safety and for extended product life, use only authorized components. The manufacturer is not responsible

for product malfunction or accidents caused by the use of separately purchased unauthorized components or parts. 

The images in this guide may be different from the actual components and accessories, and are subject to change by

the manufacturer without prior notice for product improvement purposes.

Water inlets

Shipping 

bolts

Power cord

Drain hose

NCLUDED

OPIONAL Accessories

Detergent 

dispenser 

drawer

(See page 20)

Door

Magnet Door 

Plunger

(see page 3)

Control panel 

(See page 9)

Door 

seal

Water 

circulation 

and steam 

nozzles

Tub

Leveling 

feet

Drain pump filter cover

Drain pump filter
Drain hose

1

2

3

4

5

6

7

Before servicing, ask the customer what the trouble is.

When installing or repairing the washer, put on long gloves and safety glasses.

Check the setup (power supply is 120 V

AC

, remove the transit bolts, level the washer, etc.)

Check with the troubleshooting guide.

Plan your service method by referring to the disassembly instructions.

Service the unit.

After servicing, operate the appliance to see whether it functions correctly.

STANDARD INSTALLATION

The appliance should be installed as follows:

Remove the 4 shipping bolts

with the supplied wrench.

Remove the lower boits fist.

It is easier that way.

Keep the shipping bolts and

spanner for future use.

Insert the 4 caps (provided)

into the hole.

Turn clockwise to raise;

counterclockwise to lower. 

Turn the leveling feet to

adjust the appliance.

Lower

Higher

Keeping