LG WM1832CW Service Manual ▷ View online
36
1.
Open the door.
2.
Unscrew the 7 screws from the hinge cover.
3.
Put a flat (–) screwdriver into the opening of the
hinge, and pull out the hinge cover.
4.
Unscrew the screws from the door.
5.
Disassemble the door upward / downward.
1.
Open the door.
2.
Disassemble the clamp assembly.
3.
Unscrew the 2 screws from cabinet cover.
¡
Be careful ! The door is heavy.
37
1.
Disassemble the cabinet cover.
2.
Separate the pump hose, the bellows
and the circulation hose assembly from the
pump assembly.
pump assembly.
3.
Disassemble the pump assembly in arrow
direction.
1.
Disassemble the cabinet cover.
2.
Separate 2 connectors from the heater.
3.
Loose the nut and pull out the heater.
1.
Disassemble the cabinet cover.
2.
Unplug the white connector from the thermistor.
3.
Pull it out by holding the bracket of thermistor.
CAUTION
• When assembling the heater, insert the heater
into heater clip on the bottom of the tub.
• Tighten the fastening nut so the heater
is secure.
38
1.
Disassemble the cabinet cover.
2.
Separate the heater from the tub.
3.
Remove any foreign objects (wire, coin, etc.) by
inserting a long bar in the opening.
1.
Unscrew the 4 screws from the back cover.
2.
Unscrew the single screw from the lower-right
side of the cabinet.
3.
Disconnect the connector from PWB Harness.
39
1.
Disassemble the back cover.
2.
Loosen the bolt.
3.
Pull out the Rotor.
4.
Unscrew the 2 screws from the tub bracket.
5.
Loosen the 6 bolts on the stator.
6.
Unplug the 2 connectors from the stator.
1.
Disassemble the damper hinges from the tub
and base.
2.
Separate the dampers.
NOTE
• Once removed, replace the damper pin
with new one.
Click on the first or last page to see other WM1832CW service manuals if exist.