LG WM1814CW Service Manual ▷ View online
8
1⃞ Before servicing, ask the customer what the trouble is.
2⃞ Check the setup (power supply is 120 V AC, remove the transit bolts....).
3⃞ Check with the troubleshooting guide.
4⃞ Plan your service method by referring to the disassembly instructions.
5⃞ Service the unit.
6⃞ After servicing, operate the appliance to see whether it functions correctly.
2⃞ Check the setup (power supply is 120 V AC, remove the transit bolts....).
3⃞ Check with the troubleshooting guide.
4⃞ Plan your service method by referring to the disassembly instructions.
5⃞ Service the unit.
6⃞ After servicing, operate the appliance to see whether it functions correctly.
■ STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE SHIPPING
INSTALL THE APPLIANCE
ADJUST THE
BOLTS
ON A FLAT AND FIRM SURFACE
LEVELING
Remove the 4 shipping bolts
Turn the leveling feet to adjust
with the supplied wrench.
the appliance.
※ Do first lower side to remove easily.
Keep the shipping bolts and
spanner for future use.
Insert the 4 caps
(provided) into the hole.
Turn clockwise to raise;
counterclockwise to lower.
4. INSTALLATION & TEST
9
■ HOW TO CONNECT THE INLET HOSE
Verify that the rubber washer is inside of the
valve connector.
Tighten the inlet hose securely to prevent leaks.
■ CONNECT THE DRAIN HOSE
■ CONNECT POWER PLUG
※ The end of the drain hose should be placed less than 96” from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices, as
doing so may cause a fire.
· Make sure that the hose is not twisted.
· Avoid submerging the end of the hose.
10
SOFTENER
MAX
TEST OPERATION
Connect the power plug to
the outlet.
Connect the inlet hoses.
the outlet.
Connect the inlet hoses.
Power off and the power on.
Press the SPIN SPEED button.
Press the START/PAUSE button.
Check the spin and drain
functions.
Press the SPIN SPEED button.
Press the START/PAUSE button.
Check the spin and drain
functions.
Listen for a click to determine
if the door is unlocking.
if the door is unlocking.
Listen for a click to determine if
the door has locked.
the door has locked.
If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.
remove the remaining water by
pulling out the hose cap.
Preparation for
Press the POWER button.
Press the Start/Pause
washing.
button.
Press the WASH/RINSE button
Check if the drum rotates
Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
Check the water
Check the automatic
Check the water supply.
temperature.
reverse rotation.
Check the drain and spin
Press the
Water removal
functions.
START/PAUSE button.
11
5. OPERATION
EST. TIME REMAINING
• This display shows:
a) the estimated time remaining
in the cycle when operation.
b) an error code when an error
has been detected.
a) the estimated time remaining
in the cycle when operation.
b) an error code when an error
has been detected.
CYCLE SELECTOR
• Press the Cycle selector to
select cycle designed for
different types of fabric and
soil levels.
select cycle designed for
different types of fabric and
soil levels.
START/PAUSE button
• Use this button to start/stop the
washer.
washer.
WASH,RINSE temp., SPIN SPEED, SOIL LEVEL button
• Select a water temperature based on the type of load you are washing.
• To change the spin speed, press the Spin Speed button repeatedly
to cycle through available options.
• To change the soil level, press the Soil Level button repeatedly until
the desired setting is on.
• To change the spin speed, press the Spin Speed button repeatedly
to cycle through available options.
• To change the soil level, press the Soil Level button repeatedly until
the desired setting is on.
OPTION button
• Prewash : Use this option for
loads that need pretreatment.
It adds 16 minutes prewash and drain.
loads that need pretreatment.
It adds 16 minutes prewash and drain.
POWER button
• Use this button to turn
power On/Off.
power On/Off.
• Quick Cycle : The Quick offers a quick
cycle time.
cycle time.
• Rinse+Spin : Use this option to rinse
and then spin.
and then spin.
BEEPER, DELAY WASH, EXTRA RINSE button
• Use the Beeper button to turn the Beeper On/Off.
• Delay Wash allows the start of any cycle to be delayed for 1~9
hours.
• Extra Rinse provides an additional rinse.
• Delay Wash allows the start of any cycle to be delayed for 1~9
hours.
• Extra Rinse provides an additional rinse.
DOOR LOCKED lamp
• Light whenever the door of the washer is locked.
• The door can be unlocked by pressing the Start/Pause
button to stop the washer.
• The door can be unlocked by pressing the Start/Pause
button to stop the washer.
Click on the first or last page to see other WM1814CW service manuals if exist.