LG WM-14225FD Service Manual ▷ View online
7
Before servicing ask the customer what the trouble is.
Check the adjustment (power supply is 220-240V~, remove the transit bolts....)
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions.
Then, service and repair.
After servicing, operate the appliance to see whether it works O K or NOT.
Check the adjustment (power supply is 220-240V~, remove the transit bolts....)
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions.
Then, service and repair.
After servicing, operate the appliance to see whether it works O K or NOT.
STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT
INSTALL THE APPLIANCE
ADJUST THE
BOLTS
ON FLAT AND FIRM SURFACE
HORIZONTAL
Remove the transit bolts
Turn the leveling feet to
(4EA:
①
①) with supplied spanner.
set the appliance horizontally.
Keep the transit bolts and
spanner for future use.
Insert the provided 4 caps
into the hole
The appliance goes up by
rotating the feet clockwise.
The appliance comes down by
rotating the feet counter-
clockwise.
4. INSTALLATION
1
Pre
Pre-wash
wash
Time Sav
e
ime Save
Crease Care
Crease Care
Rinse
Rinse
+
1200
1200
800
800
High
Low
8
HOW TO CONNECT INLET HOSE
Check that the rubber washer is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
Pre
Pre-wash
wash
Time Sav
e
ime Save
Crease Care
Crease Care
Rinse
Rinse
+
1200
1200
800
800
Pre
Pre-wash
wash
Time Sav
e
ime Save
Crease Care
Crease Care
Rinse
Rinse
+
1200
1200
800
800
Pre
Pre-wash
wash
Time Sav
e
ime Save
Crease Care
Crease Care
Rinse
Rinse
+
1200
1200
800
800
Make sure that the hose is not twisted.
The drain hose should be placed under 100cm from the floor.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices,
It may be the cause of a fire.
Avoid submerging the end of the hose.
9
TEST OPERATION
Pre
Pre-wash
wash
Time Sav
e
ime Save
Crease Care
Crease Care
Rinse
Rinse
+
1200
1200
800
800
Pre
Pre-wash
wash
Time Sav
e
ime Save
Crease Care
Crease Care
Rinse
Rinse
+
1200
1200
800
800
Pre
Pre-wash
wash
Time Sav
e
ime Save
Crease Care
Crease Care
Rinse
Rinse
+
1200
1200
800
800
Connect the power plug to
the outlet.
In case of coloureds program.
Connect the inlet hose.
Preparation
Press the power button.
Press the Start/Pause
for washing.
button.
Press the Temp. button
Check if the drum rotates
Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
Power off and then power on.
Check if the door can be
opened after 3 minutes.
Check if the door can be
opened after 3 minutes.
Turn off Wash and Rinse after
pressing the Start/Pause button
pressing the Start/Pause button
and start the machine again.
Check drain and spin.
If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
10
5. OPERATION
Pre Wash
Time Save
Crease Care
Rinse+
1200
800
LED display
Display the estimated remaining time
(Hour : Minute) to finish.
In case of abnormal operation, error
indications are displayed.
indications are displayed.
( )
See troubleshooting guide.
Water temperature selector
Press the button to select water
temperature.
95 C is selected for Cotton only.
By pressing the button while
operating the washer, the present
temperature is displayed.
temperature.
95 C is selected for Cotton only.
By pressing the button while
operating the washer, the present
temperature is displayed.
Wash program selector
8 program can be set depending on the type of the laundry.
If the power button is pressed, Cotton program is automatically
set.
By turning the dial, [Cotton-Synthetic -Woo/Silk-Hand Wash -
Drain-Rinse+Spin-Quick 30-Delicate ]can be selected.
(The opposite is possible)
If the power button is pressed, Cotton program is automatically
set.
By turning the dial, [Cotton-Synthetic -Woo/Silk-Hand Wash -
Drain-Rinse+Spin-Quick 30-Delicate ]can be selected.
(The opposite is possible)
Start/Pause button
Use the button to start or
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.
Pre Wash
If the laundry is heavily soiled, “Pre Wash” course is
effective.
Pre Wash is available in Cotton and Synthetic Program.
effective.
Pre Wash is available in Cotton and Synthetic Program.
Crease Care
If you want to prevent crease, select this button with spin
Option1
, , , , , , , , ,
Click on the first or last page to see other WM-14225FD service manuals if exist.