DOWNLOAD LG WM-12316FD Service Manual ↓ Size: 3.81 MB | Pages: 36 in PDF or view online for FREE

Model
WM-12316FD
Pages
36
Size
3.81 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wm-12316fd.pdf
Date

LG WM-12316FD Service Manual ▷ View online

28
The cabinet gasket clamp is released.
Two  screws  are  unscrewed  from  the  cabinet
cover.
Pull  plat(-)  screwdriver  or  pully  knife  into  the
both sides of filter cover, and pull in out.
Unscrew the screw from the lower side of the
cabinet cover.
Unscrew the 2 screw from upper of the cabinet
cover.
GASKET ASSEMBLY
29
Disassemble the clamp assembly.
Remove  dry  gasket  clamp  by  loosening  the
screw.
When  reassembling  the  gasket,  put  the  drain
hole of the gasket downward, then assemble.
Drain Hole
Tub Gasket
Clamp
30
Remove the back cover.
After  loosening  the  bolt,  Rotor,  pull  out  the
rotor.
Remove the 6 bolt from the stator.
Disconnect the 2 connectors.
Remove the hinges (Damper) at the Tub.
The  Hinge(Damper)  at  the  base  is  pulled  off
pressing on the snaps at the sharp end.
The hinge at the base is pulled off.
(To arrow direction)
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Friction
Damper
Hinge
(Damper)
(ROTOR ASSEMBLY) 
(STATOR ASSEMBLY) 
(FRICTION DAMPER) 
HOW TO ASSEMBLE THE MOTOR
Remove pump outlet hose.
Remove tub pump bellows.
Remove cap(Remaining Hose).
Disconnect the wiring.
Three screws are unscrewed from the cabinet.
Remove the pump to arrow direction.
Loosen the nut.
Remove washing heater by pulling out.
When  assembling  the  washing  heater,  insert
the heater to heater clip on the bottom of tub.
Pull it out by holding the thermistor bracket.
If holding the wire and pulling out it, it may be
broken.
Washing
Heater
Nut
Ring Terminal
PUMP
HEATER
THERMISTOR
CAUTION
31
Page of 36
Display

Click on the first or last page to see other WM-12316FD service manuals if exist.