DOWNLOAD LG WM-1114SW Service Manual ↓ Size: 14.1 MB | Pages: 64 in PDF or view online for FREE

Model
WM-1114SW
Pages
64
Size
14.1 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wm-1114sw.pdf
Date

LG WM-1114SW Service Manual ▷ View online

45
9-4. PUMP MOTOR ASSEMBLY
      
 
 
!
" # 
  
  !
  !
!  
!  
  !
 
  !  
$!
%
&
'(
) *
"*
+
* All load circuits in wiring diagram areall thesame.
Two pump motors are used to drain the tub and to circulate the water / detergent solution.
  "
  "
Test Points
Result
(1) to (2)
10-20 Ω
,
)* 
-.
-.
-.
-.
46
9-5. INLET VALVE ASSEMBLY
      
   
 
Depending on the cycle and water temperature, the controller will energize the hot or cold
water valve solenoids to meet the selected water temperature.
After pull out the connector of defective valve, check the resistance.
Test points
(1)-(2)
Result
0.8-1.2 kΩ
 !
"#
"#
#
#
$ %
$ %
$ %
$ % !
#
&
'( 
%
)
&
)
%
$
$
%
)
$
%
)
&
)
%
$
&
)
%
$
&
)
%
$
*+,
  
 
* All load circuits in wiring diagramare all the same.
*$, *%,
*$, *%,
*$, *%,
*$, *%,
47
10. DISASSEMBLY INSTRUCTIONS
Remove the power cord from the outlet before disassembling or repairing the unit.
1 Unscrew the screws on the top plate.
3 The cover(Inner) is disassembled.
2 The plate assembly(Top) is pulled back and
then upward in direction of arrow. 
1 Pull out the drawer and unscrew 2 screws.
2 Lift the side of the Control Panel Assembly and
pull it out 
1 Unscrew two screws.
2 Push out PANEL ASSEMBLY, CONTROL after
Push the hook below.
1 The PWB assembly(Display) is disconnected.
2 When 7 screws are unscrewed on the PWB
insulator and the PWB assembly(Display) is
disassembled from the PWB insulator.
CONTROL PANEL
Screws
Screws
Screws
Disassembly 3 connectors.
48
1 Disassembly lower cover assembly.
2 Two screws are unscrewed.
3 Pull the PWB assembly in direstion of red
arrow.
4 Disassembly PWB like the picture.
PWB ASSEMBLY(MAIN)
1 The plate assembly(Top) is disassembled.
3 Unscrew two screws.
3 Two screws are unscrewed.
2 Pull the drawer  in direction of arrow.
4 Clamp
4 Clamp
5 Cutting cable ties and the ventillation hose
are disassembly on the dispenser
5 Cutting cable ties and the ventillation hose
are disassembly on the dispenser
DISPENSER ASSEMBLY
2 Pull the drawer to arrow direction.
2
1
Page of 64
Display

Click on the first or last page to see other WM-1114SW service manuals if exist.