DOWNLOAD LG WFT65A31ECT Service Manual ↓ Size: 7.18 MB | Pages: 62 in PDF or view online for FREE

Press the START/PAUSE button.

Press the AUTO OFF (POWER) button to turn power on.

• When a  Wash, Wash/Rinse or Rinse only option is selected,  the water will not be drained off after the

wash is completed. 

• If you do not specify the WATER LEVEL, then Medium will be automatically selected.

• If only Rinse is selected, the process will start from Water Supply.

• Press the PROCESS button until above Option Washing light is on.   

• When you want to only drain, wait until the water in the washing tub

drains completely and then, turn off the power.  

Add  the laundry into the washing tub.

When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually

Press the WATER LEVEL button, to control the WATER LEVEL according to the
amount of laundry. If you do not choose anything, it is set the Large 
WATER LEVEL automatically.

Add the Detergent and close the lid.

Press the  POWER button.

If you want to lock all the keys to prevent  settings from being changed by a child, you can use

the child lock option.

If you want to use the washing machine without alarm signal sounds, press both the 

WATER LEVEL and  PROCESS

buttons simultaneously. 

To make buzzer work, press both the 

WATER LEVEL and  PROCESS buttons simultaneously one more time.

If you want to unlock during wash, press both the 

PROCESS and the PROGRAM button simultaneously again.

One or more WASH OPTIONS can be selected for FUZZY and JEAN washing program.

Wash program is changed as follows according to selected WASH OPTIONS.

• 

EXTRA WASH : Gives additional 3 min wash

• 

EXTRA RINSE : Gives additional one deep rinse

eg.) If you want EXTRA RINSE, 

you must add fabric softener manually when indication beep

rings in the final rinse. This maximize the fabric softener function.

• 

GENTLE SPIN : Gives GENTLE SPIN instead of normal spin.

• Turn Power on.

Press both the PROCESS button and the PROGRAM button simultaneously.

• During the wash program, all the buttons are locked until washing is

completed or until the child- lock function is deactivated manually.

• “         ” and the remaining time will be displayed alternately in

child-lock mode. 

Press the START/PAUSE button to start washing.

• After all washing conditions are set according to the manual.

• Close the water taps and remove the Water Supply Hose. 

• Remove the water which remains in the water supply.

• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.

If you use fabric softener or do regular COLD water washing, it is very important that you occasionally clean

the inside of your washer.

• Fill your washer with HOT water.
• Add about two cups of a powdered Detergent that contains phosphate.
• Let it operate for several minutes.
• Stop the washer, open the lid and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle.

We do not recommend that you wash clothes during this procedure.

• Remove the water supply hose, and immerse it in HOT water at approx.. 40 C.

• Pour approx.. 2 liters of HOT water at approx.. 40 C, into the bowl and let it stand for 10 minutes.

• Connect the water supply hose to the water tap and confirm that the washing machine performs the supply

and drainage of water.

Leave the lid open after washing to allow moisture to evaporate. If you want to clean the

inner-tub use a clean soft cloth dampened with liquid Detergent, then rinse. 

(Do not use harsh or gritty cleaners.) 

Hoses connecting washer to faucet should be replaced every 5 years.

Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp

objects.

Be sure water supply is shut off at faucets. Drain all water from hoses if weather will be

below freezing.

28