DOWNLOAD LG WFT15C65EFS Service Manual ↓ Size: 3.77 MB | Pages: 59 in PDF or view online for FREE

AIR DRY for your laundary.

Press the AUTO OFF (POWER) button to turn power on.

Press the  AIR DRY button to select the desired timing.

Press the START/PAUSE button.

Closed the lid.

■  Select "Air Dry" 30min ➔ Tub Dry

-Use this mode to keep inner tub from getting moldy caused by remaining moisture.
- Do not place any laundry inside tub.
- Use this mode once a week.
Caution) For better performance, put drain hose down to the floor so that water inside will be
completely drained out.

■  Select “Air Dry” above 1 hour

- Use this mode to reduce the drying time by minimizing remaining moisture on the laundry.

- In general, this is very effective on synthetic items(100% polyester).
- Do place laundry which is evenly distributed(Under 2kg).
- For normal clothes  : Select  1 hour
- For synthetic items(100% polyester): Select 2 hours or 3 hours(on some models)

When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.

Add  the laundry into the washing tub.

Press the START/PAUSE button.

Press the WATER LEVEL button, to control the water level according to the
amount of laundry. If you do not choose anything, it is set the middle water
level automatically.

Add the detergent and close the lid.

Press the AUTO OFF (Power) button to turn power on.

When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not
be drained off. If you wish to drain the water, press SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button.
If you do not specify the water level, then Medium will be automatically selected.
If only Rinse is selected, the process will start from Water Supply.

Press the RINSE button to select
the desired times of rinse.

Press the SPIN button to select
the desired times of spin.

Press the WASH button to
select the desired timing.

Press the RINSE button to select
the desired times of rinse.

Press the SPIN button to select
the desired times of spin.

When you want to only drain,
wait until the water in the
washing tub drains completely.  

Press the WASH button to
select the desired timing.

Press the RINSE button to
select the desired times of
rinse.

You can use this option for
preventing wrinkles of
laundry 

Press the  POWER button.

If you want to lock all the keys to prevent  settings from being changed by a child, you can use
the child lock option.

• Turn Power on.

Press both the RINSE button and the SPIN button simultaneously.

During the wash program, all the buttons are locked until washing is
completed or it is child- lock
function is deactivated manually. 

Press the START/PAUSE button to start washing.

• After all washing conditions are set according to the manual.

If you want to use the washing machine  without alarm signal sounds, press both the  WASH and  SPIN
buttons simultaneously. 
To make buzzer work, press both the  WASH and  SPIN buttons simultaneously one more time.

If you want to unlock during wash, press both the RINSE and the SPIN button simultaneously again.

To see the remaining time for each process, press one of the WASH, RINSE and SPIN buttons. 
The remaining time for each process will appear for about 1 second.

How to Unlock

“          ” & the remaining time are alternatively shown on the display while they are locked. 

• Close the water taps and remove the Water Supply Hose. 
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.

If you use fabric softener or do regular COLD water washing, it is very important that you occasionally clean
the inside of your washer.

• Fill your washer with HOT water.

• Add about two cups of a powdered Detergent that contains phosphate.

• Let it operate for several minutes.

• Stop the washer, open the lid and leave it to soak overnight.

• After soaking, drain the washer and run it through a normal cycle.

We do not recommend that you wash clothes during this procedure.

• Remove the water supply hose, and immerse it in HOT water at approx.. 40˚C.
• Pour approx.. 2 liters of HOT water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
• Connect the water supply hose to the water tap and confirm that the washing machine performs the supply

and drainage of water.

Leave the lid open after washing to allow moisture to evaporate. If you want to clean the
inner-tub use a clean soft cloth dampened with liquid Detergent, then rinse. 
(Do not use harsh or gritty cleaners.) 

Hoses connecting washer to faucet should be replaced every 5 years.

Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp
objects.

Be sure water supply is shut off at faucets. Drain all water from hoses if weather will be
below freezing.