DOWNLOAD LG WFT11C60EP / WFT1060EP / WF-T1330TP Service Manual ↓ Size: 8.39 MB | Pages: 66 in PDF or view online for FREE

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by

8minutes at maximum and decreased by 4 minutes at maximum.

* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically

adds rinsing, and the remaining time may be increased.

* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to

the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.

* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a

liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.

- During operation, the remaining time

is indicated.

DELAY START INDICATION
(RESERVATION) - When DELAY START
(RESERVATION)  program is selected, it
indicates the finishing time. (RES.=DELAY)

indication -When an error occurs, an error

message appears to indicate the abnormality. 
For example,           indicates that the lid is open.

pushed.

the button is pushed 3  4 

5 

...11  12  14      16 

...46 

48 3 

HOUR.

switch off.

Use to adjust the WATER LEVEL as required. The
appropriate amount of Detergent is shown next to the
WATER LEVEL in the WATER-DETERGENT diagram
WATER LEVEL is automatically selected for FUZZY
(normal) program.
The following settings are indicated as the button is pushed  
LARGE         LARGE . EX-LARGE        EX-LARGE
SMALL        SMALL MEDIUM        MEDIUM
MEDIUM LARGE        LARGE

This button allows you to select the
strength of the water current.
Power option selections light up in
sequence as follows  NORMAL 

‹N

STRONG 

‹N GENTLE ‹N NORMAL

as the button is pushed. This can be
selected for any program, but when
washing jeans, it starts with Strong. 
Adjustment can be made while
washing. 

Use when wash, rinse, spin
time need to be adjusted.

button is pressed . 
If adjustments are needed
during the wash, press the
[start/pause] button before
making any changes. 

• When the button is  pressed

during washing, the remaining
time is displayed. 

Temperature. 
Pressing the button allows
you to select  COLD
WARM (HOT&COLD)
HOT      COLD
respectively.  
Default setting is COLD.

* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use 

TUB CLEAN course to clean the tub.  (refer to page 19)

* Even if the water level or the water temperature are changed by the user in FUZZY(Normal) Program, 

the sensor will still work. The sensor algorithm may differ according to models.

* The control panel may differ according to different models.

Use to lock or unlock the control
buttons to prevent settings from
being changed by a child.
To lock, push the PROCESS and
PROGRAM buttons
simultaneously and to unlock
push them one more time during
the washing process.

and red in turn. And, after detecting, the LED lights a specific color according to the detecting condition as
follows:  

If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined as
better than the standard one, it optimizes the algorithm to save the energy by decreasing washing time/strength,
and the LED automatically turns to red.  
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by
increasing washing time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change and the
LED turns to green.

Use to start or pause the
washing process.
Repeats start and pause by
pushing the button.

Use to turn the power on or off.
Push again and power goes on or off
The power goes off automatically about
10 seconds after the wash is finished.

different  programs for  different kinds  of
laundry and dirtiness.

follows: FUZZY (NORMAL)
DELICATE       ECONOMY      JEAN
WOOL       SILENT       FAVORITE
TUB CLEAN      FUZZY (NORMAL)
etc. Select the desired program by
pressing the button.

Used for normal loads, this mode

automatically selects the most

appropriate conditions and

completes the sequence in one

operation. The built-in sensor

detects the size of the load and the

ideal wash power and wash, rinse

and spin times are set accordingly.

Use this mode when washing lightly
soiled clothes for a short time. The
highly recommended laundry amount
is under 2.0kg.

Use Jean program when washing
Jeans of different sizes

Use this program to wash items
requiring a GENTLE WASH action. 
This would include blouses, nylons
and dress shirts with light soiled.

Select the

program

on the

Control

panel.

Add the appropriate
quantity of Detergent as
indicated by the WATER
LEVEL next to 
WATER DETERGENT.
Or follow the Detergent
manufacturer’s instructions

Add the appropriate

quantity of Detergent as

indicated by the WATER

LEVEL next to 

Or follow the Detergent

manufacturer’s

instructions

Select the

JEAN program

on the

Control panel.

Spread

the jean

evenly in

the tub

Select the
WOOL
program on
the Control
panel.

Use this program for washing delicate
fabrics such as lingerie and woolens.
(wash only “water washable” clothes)
Before washing your woolens check the care
label for the washing instructions.
(wash only water washable clothes)

Use neutral
Detergent
appropriate for the
laundry.
When washing
woolens use a
mild Detergent
recommend- ed
for washing wool.

·Select the

DELICATE
program on
the Control
panel.

The pulsator rotates for
8 seconds to detect the
laundry load.
Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and
water will be supplied.

Water will be
supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.

When the wash
program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.

If water is already in the tub, or putting wet
laundry into the tub before starting will
increase the WATER LEVEL.
With lightweight bulky loads, WATER LEVEL
can be set low. 
Changes to Water Temperature
(HOT/COLD) and wash level are possible
during operation.  

When setting the WATER LEVEL manually,
do not set to Medium to prevent damage to
laundry.
Washing with HOT water may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg.

In order to avoid  damage to laundry, 
the spin cycle may appear slow.
This also avoids wrinkles and clothing may
still contain some water. This is normal.

Before starting to wash, make sure that the
laundry is washable.
Washing with HOT water may damage the
laundry (Water is set to COLD
automatically).