LG WFSL1332ET Service Manual ▷ View online
17
DELAY START (RESERVATION) BUTTON
• Use to set a delayed finishing time.
• The time increases when the button
• The time increases when the button
is pushed.
• The following settings are indicated
as the button is pushed 3 4 5
... 11 12
... 11 12
14 16 ...46 48
3 HOUR.
• To cancel delay time, turn the power
switch off.
(refer to page 24)
START/ PAUSE BUTTON
• Use to start or pause the
washing process.
• Repeats start and pause by
pushing the button.
POWER
(AUTO OFF) BUTTON
• Use to turn the power on or off.
• Push again and power goes on or off
• The power goes off automatically about
• Push again and power goes on or off
• The power goes off automatically about
10 seconds after the wash is finished.
PROGRAM BUTTON
• Use for selecting wash program.
• This button allows you to select 8
different programs for different kinds of
laundry and dirtiness.
• program selections light up in sequence as
follows: FUZZY(NORMAL) WOOL
QUICK WASH JEAN EXTRA
CLEANING
SILENT
FAVORITE
TUB CLEAN FUZZY(NORMAL)
etc. Select the desired program by
pressing the button.
* The control panel may differ according to different models.
18
3-4. WASHING PROGRAMS
Washing
Programs
Add
the
laundry
Add
the Detergent
(Normal Wash)
Used for normal loads, this
mode automatically selects the
most appropriate conditions
and completes the sequence
in one operation. The built-in
sensor detects the size of the
load and the ideal wash
power and wash, rinse and
spin times are set accordingly
.
Use this mode when washing
lightly soiled clothes for a short
time. The highly recommended
laundry amount is under 2.0kg.
Use this program to increase
rising performance.
This would include underwear
and baby clothes.
If someone has sensitive skin or
skin trouble,use this program.
POWER
AUTO OFF
1
1
2
4
5
5
5
5
3
2
• Select the
QUICK
WASH
program on
the Control
panel.
• Add the appropriate
quantity of Detergent as
indicated by the WATER
LEVEL next to
WATER DETERGENT.
Or follow the Detergent
manufacturer’s
instructions
• Add the appropriate
quantity of Detergent as
indicated by the WATER
LEVEL next to
WATER DETERGENT.
Or follow the Detergent
manufacturer’s
instructions
Use Jean program when
washing Jeans of different sizes
1
3
2
• Select the
JEANS program
on the Control
panel.
• Spread
the jean
evenly in
the tub
1
3
2
• Select the
WOOL
program on
the Control
panel.
Use this program for washing
delicate fabrics such as lingerie and
woolens. (wash only “water
washable” clothes)
Before washing your woolens
check the care label for the
washing instructions.
(wash only water washable clothes)
• Use neutral Detergent
appropriate for the
laundry.
• When washing
woolens use a mild
Detergent
recommend- ed for
washing wool.
1
3
2
• Select the
EXTRA
CLEANING
program on the
Control panel.
19
Close the lid
Finish
Caution & Note
ST
STAR
ART
PAUSE
USE
POWER
• The pulsator rotates for
8 seconds to detect the
laundry load.
laundry load.
• Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and
water will be supplied.
Detergent to be used
will be shown and
water will be supplied.
• Water will be
supplied for 2
minutes after the start
of the wash to
supplement the
water the laundry
has absorbed.
minutes after the start
of the wash to
supplement the
water the laundry
has absorbed.
• When the wash
program ends, the
buzzer will ring for
10 seconds before
the Power goes off
automatically.
buzzer will ring for
10 seconds before
the Power goes off
automatically.
• If water is already in the tub, or
putting wet laundry into the tub
before starting will increase the
WATER LEVEL.
before starting will increase the
WATER LEVEL.
• With lightweight bulky loads,
WATER LEVEL can be set low.
• Changes to Water Temperature
(HOT/COLD) and wash level are
possible during operation.
(refer to page 14)
possible during operation.
(refer to page 14)
3
5
6
7
6
7
6
4
4
7
6
4
• When setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.
prevent damage to laundry.
• Washing with HOT water may
damage the laundry (Water is set to
cold automatically). Ensure that the
load is under 2kg.
cold automatically). Ensure that the
load is under 2kg.
• In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and
clothing may still contain some
water. This is normal.
This also avoids wrinkles and
clothing may still contain some
water. This is normal.
• When static pressure of water is
more than 2kg/cm
2
, the QUICK
WASH course will be within
19min.
19min.
7
6
4
20
3-5. OTHERS FUNCTIONS
1) SOAK Wash
Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty.
SOAK mode can be used with FUZZY or JEAN, SILENT or FAVORITE program.
Press the
POWER(AUTO OFF) button to turn power on.
1
Press the
PROGRAM button to select the washing program.
• SOAK will not work in WOOL and QUICK WASH,
TUB CLEAN Program.
• Keep pressing the WASH button until the light turns on ‘Soak’ and
‘Wash’ simultaneously as next image.
• SOAK program only works when socking time is 40, 50 or 60 minutes.
2
Press the WASH button, to select SOAK program.
3
Add the Detergent.
• The appropriate quantity of Detergent marked next to the
WATER LEVELof WATER-Detergent.
4
Add the laundry and press the
START/PAUSE button.
• The
WATER LEVEL will be shown and water will be supplied.
5
Close the lid.
Finish
• Water will be supplied for 2 minutes after the start of the wash
to supplement the absorbed water by the laundry.
6
When the wash program ends, the buzzer will ring for 10seconds
before the Power goes off automatically.
POWER
AUTO OFF
START
PAUSE
min
min
min
min
min
min
min
min
min
min
min
min
min
Lamp
Off
Soak-Wash
NOTE
•
Order of Soak-Wash timing
•
Select soaking time 40minutes, 50minutes, or 60minutes (including washing time) by pressing the Wash button repeatedly.
•
If necessary, select the times of Rinse and the time for Spinning by pressing the Rinse or Spin buttons till you reach the desired
times.
Click on the first or last page to see other WFSL1332ET service manuals if exist.