DOWNLOAD LG WF-TS1400 Service Manual ↓ Size: 5.1 MB | Pages: 63 in PDF or view online for FREE

QUICK Wash

* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use 

TUB CLEAN course to clean the tub.  (refer to page 23)

* Even if the water level or the water temperature are changed by the user in FUZZY(Normal) Program, 

the sensor will still work. The sensor algorithm may differ according to models.

* The control panel may differ according to different models.

Use to lock or unlock the control
buttons to prevent settings from
being changed by a child.
To lock, push the RINSE and
SPIN buttons simultaneously and
to unlock push them one more
time during the washing process.

and red in turn. And, after detecting, the LED lights a specific color according to the detecting condition as
follows:  

If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined as
better than the standard one, it optimizes the algorithm to save the energy by decreasing washing time/strength,
and the LED automatically turns to red.  
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by
increasing washing time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change and the
LED turns to green.

Use to start or pause the
washing process.
Repeats start and pause by
pushing the button.

Use to turn the power on or off.

  Push again and power goes on or off

The power goes off automatically about
10 seconds after the wash is finished.

different  programs for  different kinds  of
laundry and dirtiness.

follows: FUZZY (NORMAL)
DELICATE      QUICK Wash

JEAN

WOOL       SILENT       FAVORITE
TUB CLEAN      FUZZY (NORMAL)
etc. Select the desired program by
pressing the button.

Used for normal loads, this mode

automatically selects the most

appropriate conditions and

completes the sequence in one

operation. The built-in sensor

detects the size of the load and the

ideal wash power and wash, rinse

and spin times are set accordingly.

Use this mode when washing lightly
soiled clothes for a short time. The
highly recommended laundry amount
is under 2.0kg.

Use Jean program when washing
Jeans of different sizes

Use this program to wash items
requiring a GENTLE WASH action. 
This would include blouses, nylons
and dress shirts with light soiled.

• Select the

program on

the Control

panel.

• Add the appropriate

quantity of Detergent as
indicated by the WATER
LEVEL next to 
WATER DETERGENT.
Or follow the Detergent
manufacturer’s instructions

• Add the appropriate

quantity of Detergent as

indicated by the WATER

LEVEL next to 

Or follow the Detergent

manufacturer’s

instructions

• Select the

JEAN program

on the Control

panel.

• Spread

the jean

evenly in

the tub

• Select the

WOOL
program on
the Control
panel.

Use this program for washing delicate
fabrics such as lingerie and woolens.
(wash only “water washable” clothes)
Before washing your woolens check the care
label for the washing instructions.
(wash only water washable clothes)

• Use neutral

Detergent
appropriate for the
laundry.

• When washing

woolens use a mild
Detergent
recommend- ed for
washing wool.

• Select the

DELICATE
program on
the Control
panel.

• The pulsator rotates for

8 seconds to detect the
laundry load.

• Then the WATER LEVEL

and the amount of
Detergent to be used
will be shown and
water will be supplied.

• Water will be

supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.

• When the wash

program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.

• If water is already in the tub, or putting wet

laundry into the tub before starting will
increase the WATER LEVEL.

• With lightweight bulky loads, WATER LEVEL

can be set low. 

• Changes to Water Temperature (HOT/COLD)

and wash level are possible during
operation.  

• When setting the WATER LEVEL manually,

do not set to Medium to prevent damage to
laundry.

• Washing with HOT water may damage the

laundry (Water is set to cold automatically).
Ensure that the load is under 2kg.

• In order to avoid  damage to laundry, 

the spin cycle may appear slow.
This also avoids wrinkles and clothing may
still contain some water. This is normal.

• Before starting to wash, make sure that the

laundry is washable.

• Washing with HOT water may damage the

laundry (Water is set to COLD
automatically).

• Ensure that the load is under 2kg.

Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty. 
SOAK mode can be used with FUZZY or JEAN, SILENT or FAVORITE program.

Press the AUTO OFF (POWER) button to turn power on.

Press the  PROGRAM button to select the washing program.

• SOAK will not work in WOOL and  ECONOMY, TIUB CLEAN, 

DELICATE Program.

• Keep pressing the WASH button until the

light turns on “Soak” and  ”Wash”
simultaneously as next image.

• SOAK program only works when socking

time is 40,  50 or 60 minutes. 

Press the WASH button, to select SOAK program.

Add the Detergent.

• The appropriate quantity of Detergent marked next to the

WATER LEVEL of WATER-DETERGENT.

Add the laundry and press the START/PAUSE button.

• The WATER LEVEL and the amount of Detergent to be used will

be shown and water will be supplied.

Close the lid. 

Finish

• Water will  be supplied for 2 minutes after the start of the wash

to supplement the absorbed water by the laundry. 

When the wash program ends, the buzzer will ring for 10seconds
before the Power goes off automatically.