LG WF-T1350TP Service Manual ▷ View online
hs
a
W
ot
gn
it
ra
tS
e
ro
fe
B
* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use
TUB CLEAN course to clean the tub. (refer to page 17)
* Even if the water level or the water temperature are changed by the user in FUZZY(Normal) Program,
the sensor will still work. The sensor algorithm may differ according to models.
* The control panel may differ according to different models.
TIME LEFT, DELAY START (RESERVATION), ALARM INDICATION
• Time left
- During operation, the remaining time is indicated.
• DELAY START INDICATION (RESERVATION)
- When
DELAY START (RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
• Alarm indication
-When an error occurs, an error message
appears to indicate the abnormality. For example, indicates
that the lid is open.
CHILD LOCK FUNCTION
•
Use to lock or unlock the control
buttons to prevent settings from
being changed by a child.
To lock, push the PROCESS and
PROGRAM buttons
simultaneously and to unlock
push them one more time during
the washing process.
(refer to page 17)
START/ PAUSE BUTTON
•
Use to start or pause the
washing process.
•
Repeats start and pause by
pushing the button.
PROCESS BUTTON
•
Use to select
SPEEDY SOAK,
Wash, Rinse and Spin
functions as desired.
AUTO OFF
(POWER) BUTTON
•
Use to turn the power on or
off.
•
Push again and power goes
on or off
•
The power goes off
automatically about 10
seconds after the wash is
finished.
PROGRAM BUTTON
•
Use for selecting wash program.
•
This button allows you to select 4
different programs for different kinds of
laundry and dirtiness.
•
program selections light up in sequence as
follows: FUZZY (NORMAL)
JEAN WOOL
FUZZY (NORMAL) etc. Select the
desired program by pressing the button.
QUICK WASH
Note
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
WATER TEMPERATURE BUTTON (OPTION)
DELAY START (RESERVATION) BUTTON
•
Use to set a delayed finishing time.
•
The time increases when the button
is pushed.
•
The following settings are indicated
as the button is pushed 3 4 5
... 11 12 14 16 ... 46 48
3 HOUR.
•
To cancel delay time, turn the power
switch off.
WATER LEVEL BUTTON
(INDICATION OF DETERGENT AMOUNT)
•
Use to adjust the WATER LEVEL as required. The appropriate amount of
Detergent is shown next to the WATER LEVEL in the WATER-
DETERGENT diagram
•
WATER LEVEL is automatically selected for FUZZY (normal) program.
The following settings are indicated as the button is pushed
LARGE LARGE . EX-LARGE EX-LARGE SMALL
SMALL MEDIUM MEDIUM MEDIUM LARGE LARGE
Use to select Water Temperature.
Pressing the button allows you to select
COLD
WARM (HOT&COLD)
HOT COLD respectively.
Default setting is COLD.
OPTION BUTTON
•
According to kinds of
laundry, Air Dry, soiled
extent or washing habit you
can select suitable OPTION
manually.
•
By pressing the button
OPTION is changed.
TUB CLEAN BUTTON
Use to TUB CLEAN
the control buttons to
clean inner tub and outer
tub. To use, push the
WATER LEVEL and
DELAY START buttons
•
17
hs
a
W
ot
gn
it
ra
tS
e
ro
fe
B
* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use
TUB CLEAN course to clean the tub.
* Even if the water level or the water temperature are changed by the user in FUZZY(Normal) Program,
the sensor will still work. The sensor algorithm may differ according to models.
* The control panel may differ according to different models.
TIME LEFT, DELAY START (RESERVATION), ALARM INDICATION
• Time left
- During operation, the remaining time is indicated.
• DELAY START INDICATION (RESERVATION)
- When
DELAY START (RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
• Alarm indication
-When an error occurs, an error message
appears to indicate the abnormality. For example, indicates
that the lid is open.
CHILD LOCK FUNCTION
•
Use to lock or unlock the control
buttons to prevent settings from
being changed by a child.
To lock, push the PROCESS and
PROGRAM buttons
simultaneously and to unlock
push them one more time during
the washing process.
START/ PAUSE BUTTON
•
Use to start or pause the
washing process.
•
Repeats start and pause by
pushing the button.
PROCESS BUTTON
•
Use to select
SPEEDY SOAK,
Wash, Rinse and Spin
functions as desired.
AUTO OFF
(POWER) BUTTON
•
Use to turn the power on or
off.
•
Push again and power goes
on or off
•
The power goes off
automatically about 10
seconds after the wash is
finished.
PROGRAM BUTTON
•
Use for selecting wash program.
•
This button allows you to select 4
different programs for different kinds of
laundry and dirtiness.
•
program selections light up in sequence as
follows: FUZZY (NORMAL)
JEAN WOOL
FUZZY (NORMAL) etc. Select the
desired program by pressing the button.
QUICK WASH
Note
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
WATER TEMPERATURE BUTTON (OPTION)
DELAY START (RESERVATION) BUTTON
•
Use to set a delayed finishing time.
•
The time increases when the button
is pushed.
•
The following settings are indicated
as the button is pushed 3 4 5
... 11 12 14 16 ... 46 48
3 HOUR.
•
To cancel delay time, turn the power
switch off.
(refer to page 18)
WATER LEVEL BUTTON
(INDICATION OF DETERGENT AMOUNT)
•
Use to adjust the WATER LEVEL as required. The appropriate amount of
Detergent is shown next to the WATER LEVEL in the WATER-
DETERGENT diagram
•
WATER LEVEL is automatically selected for FUZZY (normal) program.
The following settings are indicated as the button is pushed
LARGE LARGE . EX-LARGE EX-LARGE SMALL
SMALL MEDIUM MEDIUM MEDIUM LARGE LARGE
Use to select Water Temperature.
Pressing the button allows you to select
COLD
WARM (HOT&COLD)
HOT COLD respectively.
Default setting is COLD.
OPTION BUTTON
•
According to kinds of
laundry, Air Dry, soiled
extent or washing habit you
can select suitable OPTION
manually.
•
By pressing the button
OPTION is changed.
(refer to page 19)
(refer to page 17)
TUB CLEAN BUTTON
Use to TUB CLEAN
the control buttons to
clean inner tub and outer
tub. To use, push the
WATER LEVEL and
DELAY START buttons
•
17
18
3-4. WASHING PROGRAMS
Washing
Programs
Add
the
laundry
Add
the detergent
Fuzzy Washing
(Normal Wash)
Used for normal loads, this mode
automatically selects the most
appropriate conditions and
completes the sequence in one
operation. The built-in sensor
detects the size of the load and the
ideal wash power and wash, rinse
and spin times are set accordingly
Quick Wash
Use this mode when washing
lightly soiled clothes for a
short time. The highly
recommended laundry
amount is under 2.0kg.
lightly soiled clothes for a
short time. The highly
recommended laundry
amount is under 2.0kg.
Jean Wash
Use Jean program when
washing Jeans of different
sizes
washing Jeans of different
sizes
Speedy Soak Wash
Use this mode to wash normal
clothes or thick and heavy
clothes which are excessively
dirty.
Speedy Soak mode can be
used with Fuzzy or Jean
program.
AUTO OFF
PPRRO
O--
G
GRRAAM
M
PPRRO
O--
CCEESSSS
1
1
1
1
1
2
5
4
5
5
6
3
3
3
4
2
2
2
2
3
Select the
Quick Wash
program on
the Control
panel.
Add the appropriate
quantity of detergent as
indicated by the water
level next to
Water-
Detergent.
Or follow the detergent
manufacturer’s
instructions
Add the appropriate
quantity of detergent as
indicated by the water
level next to
Water-
Detergent.
Or follow the detergent
manufacturer’s
instructions
Select the
Jean
program on
the Control
panel.
Spread the
jean
evenly in
the tub
Select the
Wool
program on
the Control
panel.
Speedy
Soak will
not work in
Wool &
Economy
Program.
Keep pressing the PROCESS button until the Speedy Soak light is on
and then Wash, Rinse, Spin lights are on simultaneously.
Until the washing process is completed, the Speedy Soak light is on.
Wash
Rinse
Spin
Speedy Soak
Wool Wash
Use this program for washing
delicate fabrics such as lingerie and
woolens.
(wash only “water washable” clothes)
Before washing your woolens check
the care label for the washing
instructions.(wash only water
washable clothes)
Use neutral detergent
appropriate for the
laundry.
When washing woolens
use a mild detergent
recommend- ed for
washing wool.
19
Close the lid
Finish
Caution & Note
PRO-
GRAM
PRO-
CESS
PRO-
GRAM
PRO-
CESS
DELAY
START
WATER
LEVEL
START
PAUSE
WATER
TEMP.
The pulsator rotates for 8
seconds to detect the laundry
load.
Then the water level and the
amount of detergent to be
used will be shown and water
will be supplied.
seconds to detect the laundry
load.
Then the water level and the
amount of detergent to be
used will be shown and water
will be supplied.
Water will be
supplied for 2
minutes after the
start of the wash
to supplement the
water the laundry
has absorbed.
supplied for 2
minutes after the
start of the wash
to supplement the
water the laundry
has absorbed.
When the wash
program ends, the
buzzer will ring for
10 seconds before
the Power goes off
automatically.
program ends, the
buzzer will ring for
10 seconds before
the Power goes off
automatically.
If water is already in the tub, or putting wet
laundry into the tub before starting will
increase the water level.
With lightweight bulky loads, water level
can be set low.
Changes to water temperature (hot/cold)
and wash level are possible during
operation.
(refer to page 12)
laundry into the tub before starting will
increase the water level.
With lightweight bulky loads, water level
can be set low.
Changes to water temperature (hot/cold)
and wash level are possible during
operation.
(refer to page 12)
The water level and the
amount of detergent to be
used will be shown and
water will be supplied.
amount of detergent to be
used will be shown and
water will be supplied.
3
5
6
7
8
7
7
6
6
6
7
4
4
5
4
When setting the water level manually, do
not set to MEDIUM to prevent damage to
laundry.
not set to MEDIUM to prevent damage to
laundry.
Washing with hot water may damage the
laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg.
laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg.
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain some water. This is
normal.
the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain some water. This is
normal.
Speedy Soak Wash cannot be selected
for the Wool Wash program.
for the Wool Wash program.
If wool wash is selected, Gentle Spin will
be set automatically.
be set automatically.
Click on the first or last page to see other WF-T1350TP service manuals if exist.