DOWNLOAD LG WF-T1054TP Service Manual ↓ Size: 12.24 MB | Pages: 60 in PDF or view online for FREE

Press the DELAY START (RESERVATION) button to set the time when the
delayed washing is to be completed.

Press the POWER button to turn power on.

• If the lid is open,  the machine will not work, and an alarm  signal will alarm to remind you to close the lid. 
• To select washing program, spinning time, WATER LEVEL or HOT/COLD  manually, press the DELAY START

(RESERVATION)  button and select the desired option. Then press the START/PAUSE button.

• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning program .

(The laundry will be wrinkled if left for a long time after spinning.)

Press the PROGRAM button to select the washing program.

• Select the  program for laundry on the Control panel.

This program will not work in WOOL and DELICATE Program.

• When you press the START/PAUSE button the light will blink.

•  How to set the delay time.

Example : It’s 7 a.m. now. If  you’d like your wash to finish at

9 p.m. set the time as in the figure below. 

When you push the button the reservation time changes 
[3 

→ 4 → 5 → ...12 → 14 → 16 → ... → 48 → 3] repeatedly.

Add the laundry and press the START/PAUSE button.

DELAY START (RESERVATION) Wash is used to delay the finishing time of the operation. 
The hours to be delayed can be set by the user accordingly. 
The time on the display is the finishing  time , not  the start time. 

Add the Detergent.

• The appropriate quantity of Detergent marked next to the 

WATER LEVEL of WATER•DETERGENT.

• When the lid is open the machine will not operate, and an alarm

signal will remind you to close the lid

Close the lid. 

Finish

• Water will be supplied for 2 minutes after the start of the wash to

supplement the water the laundry has absorbed.

The washing will be finished according to the delayed time.

(RES.=DELAY)

Turn Power on.

One or more OPTIONS (Extra Rinse, Gentle spin) can be selected for FUZZY and JEAN
washing program. Wash program is changed as follows according to selected OPTIONS.
“AIR DRY” can be selected, after turning on the power and “AIR DRY” times can be
changed by pressing the “OPTION” button.

Press the power button

Press the Option button untill above AIR DRY light is on.

Press the START/PAUSE button.

Closed the lid.

This cause is used to air dry of your laundry and tub dry

Gives additional one deep rinse
eg.) If you want EXTRA RINSE, you must add fabric softener manually

when indication beep rings in the final rinse. This maximize the
fabric softener function.

Gives GENTLE SPIN instead of normal spin.

■ Select "Air Dry" 30min ‘ Tub Dry 

-Use this mode to keep inner tub from getting moldy caused by remaining moisture.
- Do not place any laundry inside tub.
- Use this mode once a week.
Caution) For better performance, put drain hose down to the floor so that water inside
will be completely drained out.

■ Select"Air Dry" above 1 hour

- Use this mode to reduce the drying time by minimizing remaining moisture on the

laundry.

- In general, this is very effective on synthetic items(100% polyester).
- Do place laundry which is evenly distributed(Under 2kg).
- For normal clothes  : Select  1 hour
- For synthetic items(100% polyester): Select 2 hours or 3 hours(on some models)

Press the START/PAUSE button.

Press the AUTO OFF (POWER) button to turn power on.

• When a  Wash, Wash/Rinse or Rinse only option is selected,  the water will not be drained off after the

wash is completed. 

• If you do not specify the WATER LEVEL, then Medium will be automatically selected.
• If only Rinse is selected, the process will start from Water Supply.

• Press the PROCESS button until above Option Washing light is on.   

• When you want to only drain, wait until the water in the washing tub

drains completely and then, turn off the power.  

d

dWASHe

e, d

dWASH+RINSEe

e, d

dRINSEe

e, d

dRINSE+SPINe

e, d

dSPINe

eONLY OPTIONS

Add  the laundry into the washing tub.

When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually

Press the WATER LEVEL button, to control the WATER LEVEL according to the
amount of laundry. If you do not choose anything, it is set the Large 
WATER LEVEL automatically.

Add the Detergent and close the lid.

Press the  POWER button.

If you want to lock all the keys to prevent  settings from being changed by a child, you can use
the child lock option.

If you want to use the washing machine without alarm signal sounds, press both the  WATER LEVEL and  PROCESS
buttons simultaneously. 
To make buzzer work, press both the  WATER LEVEL and  PROCESS buttons simultaneously one more time.

If you want to unlock during wash, press both the PROCESS and the PROGRAM button simultaneously again.

• Turn Power on.

Press both the PROCESS button and the PROGRAM button simultaneously.

• During the wash program, all the buttons are locked until washing is

completed or until the child- lock function is deactivated manually.

• “         ” and the remaining time will be displayed alternately in

child-lock mode. 

Press the START/PAUSE button to start washing.

• After all washing conditions are set according to the manual.