WF-SA12HD6 — LG Washing Machine Service Manual (repair manual). Page 9

View LG WF-SA12HD6 Service Manual online

Drain Hose
Within 50mm
 For pump model
 For non - pump model
 NOTE : • Never lay down the drain hose, as water will be discharged.
• Be sure the drain hose is properly routed so it will not kink or lift from the sink.
• The discharge height should be approximately 0.9~1.2m from the floor.
•  Connect the drain hose adjusting the length of it not to be dropped. If drain hose is dropped the 
drainage could be poor because of blockage in the hose.
Connect the drain hose to 
the outlet of the drain pump 
located at the rear of the 
washing machine.
Attach the clip to the drain 
hose. And then push it 
toward the body of the 
washing machine as 
indicated by the arrow.
•  Check that the drain hose is 
hung up over the edge of the 
laundry tub.
• Do not use an extension hose.
•  Connect the drain hose to the outlet of the drain 
located at the back side of the washing machine.
•  Fix the drain hose with the clip. 
And then push it toward the body as in the figure.
• Keep it downward while the washing machine is working.
• Ensure the hose is free from kinking.
•  Do not install the washer where it is directly exposed to sunlight,  
wind, rain etc.
•  Plug the power cord of this washer into a properly installed  
standard electrical outlet that is switched & earthed.
Page of 57

Click on the first or last page to see other WF-SA12HD6 service manuals if exist.