LG WF-D70VBA / WF-D70WSA / WF-D80VBA / WF-D80WSA Service Manual ▷ View online
9.
Disassembly guide
● Unplug before repairing and replacing
electronic components.
Electrostatic Cautions
Chart 1
●Earth wire should be connected before
troubleshooting or parts replacement.
● Discharging before working if possible.
Connector
PC board module
9-1. Front panel and PC board
disassembly
①
Remove two screw caps with sharp tools;
Then remove fixed screw on front panel
Then remove fixed screw on front panel
②
Push front panel to the left and fetch out
③
Remove connectors on PC board
④
Unload 4 screws on front panel
⑤
Unload PC board module
17
Tub Cycle
Fixed nut
Tub Cycle
Outer tub
Inner tub
Inner tub
Clutch
Pivot
Connector drain hose
9-3 Back panel Disassembly
①
Unplug fixed screw on back panel and then
remove back panel.
9-4.Update boom components
②
Separate top cap from the washer.
②
As is shown, separate boom from outer tub.
③
Do not remove the boom components and
replace it whole.
replace it whole.
④
Assemble according to Table below(position
and colour)
and colour)
Position
P/NO.
PIVOT(Color )
K100
Blue
Fixed nut
Rotor
Stator
Rotor nut
19
9-5. Replace rotor and stator
②
②
remove rotor nuts with wrench(M18)。
②
remove and fetch out rotor as is shown.
Fixed hole
③
Remove fixed hole and Hydraulic
conductivity board。
conductivity board。
retaining piece
Stator base
Hall element
Hall element
④
Unplug hall element and stator connector
before removing stator.
before removing stator.
20
Click on the first or last page to see other WF-D70VBA / WF-D70WSA / WF-D80VBA / WF-D80WSA service manuals if exist.