LG WDN1753BS Service Manual ▷ View online
56
WHEN FOREIGN OBJECT IS STUCK BETWEEN DRUM AND TUB
①
①
Disassemble the cabinet cover.
②
②
Separate the heater from the tub.
③
③
Remove any foreign objects (wire, coin, etc.) by
inserting a long bar in the opening.
LAMP ASSEMBLY
TOP PLATE ASSEMBLY
①
① Unscrew 2 screws on the back of the top plate.
②
② Pull the top plate backward and upward as shown.
③
③ Disconnect the connector.
Disassemble the lamp assembly.
57
MOTOR/DAMPER
1
Disassemble the back cover.
2
Remove the bolt.
3
Pull out the Rotor.
1
Unscrew the 2 screws from the tub bracket.
2
Remove the 6 bolts on the stator.
3
Unplug the 2 connectors from the stator.
1
Disassemble the damper hinges from the tub and
base.
NOTE
If you pull the dampers apart, the must be
replaced. If you do not separate them, they
can be re-used.
58
Checking the TSG (TURBO STEAM GENERATOR)
TSG (TURBO STEAM GENERATOR)
1
To check out the fault diagnosis of TSG, you can
pull out the plug and let the water drain away.
2
Be cautious in case of the TSG is hot.
1
Remove the housing attached to the TSG
(Heater, Water level frequency-sensor,
Thermistor)
2
Remove the screw of the TSG and Body
Frame.
59
3
Taking out the screws of Body Frame (2 ea)
5
Remove the body frame and then, separate the
TSG from the washer
4
Separate the hoses from the TSG.
Click on the first or last page to see other WDN1753BS service manuals if exist.