LG WD551276RC Service Manual ▷ View online
29
WILL NOT CIRCULATE WATER
Is the impeller of the drain pump clogged?
Are the Hose Connector and/or Hose clogged?
Is the connector disconnected, disassembled?
Is the coil of the right side of drain pump open
or short circuited? (Coil R is 18-30 1)
or short circuited? (Coil R is 18-30 1)
When checking voltage between the
connectors during spin, is the voltage 220-240V
AC, as the figure?
connectors during spin, is the voltage 220-240V
AC, as the figure?
Remove foreign material.
Remove foreign material.
Reconnect or repair
the connector.
the connector.
Replace PUMP MOTOR
ASSEMBLY.
ASSEMBLY.
Replace the MAIN PWB
ASSEMBLY.
ASSEMBLY.
30
zwpuG{yv|isl
lyyvy
(1)
(1)
(2)
jGGGGG GGG
GGY[_GGU
GGY[_GGU
~GGySGzSGGwG
GGGGGSGG
z{hy{Vwh|zlGGYGGGxjG{GS
GGGGGGf
GGGGGSGG
z{hy{Vwh|zlGGYGGGxjG{GS
GGGGGGf
pGGSGGf
yaGZGOXPSGuhaG[GOYP
yaGZGOXPSGuhaG[GOYP
yGGa
hG\ TX\
jGGGSGpGGG
GGGGGGf
tv{vyG{lytpuhs
GGGGGGf
tv{vyG{lytpuhs
yGGthpuGw~iGhzzltis
kGGGGsGoGf
pGGGGGGGG
z{hy{Vwh|zl GGGGGG f
z{hy{Vwh|zl GGGGGG f
pGkvvyGz~p{joGhzzltisGf
jGGzluzvyGz~p{jo
hzzltisGGovzlGOwPU
pGGGGGGzluzvy
z~p{joGhzzltisGG
ovzlSGGGzluzvy
z~p{joGhzzltisGG
ovzlU
hzzltisGGovzlGOwPU
pGGGGGGzluzvy
z~p{joGhzzltisGG
ovzlSGGGzluzvy
z~p{joGhzzltisGG
ovzlU
u
jGGU
yGGz{h{vy
hzzltis
hzzltis
yGkGh U
jGGkvvyGz~p{jo
hzzltisGjG
thpuGw~iGhzzltis
OyGZGSGG[GG
GZGGGOXPPU
hzzltisGjG
thpuGw~iGhzzltis
OyGZGSGG[GG
GZGGGOXPPU
yGGkvvy
z~p{joGhzzltisU
z~p{joGhzzltisU
S
31
CONTROL PANEL ASSEMBLY
9.DISASSEMBLY INSTRUCTIONS
Be sure to unplug the machine out of the outlet before disassembling and repairing the parts.
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as shown.
Disconnect the Display PWB Assembly connector
from Trans cable.
Pull out the drawer and unscrew 2 screws.
Lift the left side of the Control Panel Assembly and
pull it out.
Unscrew the 9 screws from the Control Panel
Assembly.
Disassemble the Display PWB Assembly.
32
Replace the thermistor.
6322FR2046C : Dry
Duct
6322FR2046C : Dry
Duct
Is the resistance of thermistors on dry duct
2.5k1 - 180k1 (at 100
2.5k1 - 180k1 (at 100
~ 0
Clean the bellows
Disassemble the cabinet cover and
condensing bellows.
Is there any foreign object in the condensing
bellows.
condensing bellows.
Is there any foreign object in the condensing
bellows.
Disassemble the dry fan assembly and dry
duct upper, and remove foreign objects in
duct and fan.
duct upper, and remove foreign objects in
duct and fan.
Click on the first or last page to see other WD551276RC service manuals if exist.