DOWNLOAD LG WD14030RD6 Service Manual ↓ Size: 16.22 MB | Pages: 60 in PDF or view online for FREE

Connect Drain Hose.

6

Connect power plug.

7

If the drain hose is not installed properly, the unit will not drain properly.
This allows water to back flow into the unit which can cause odors.
Refer to Owner Manual for proper drain hose installation.
The odor could also be coming from the home’s drain to which the drain hose is attached.

In this type of drain hose installation, the odor could be coming from the standpipe.
This odor can come up the drain hose and into the unit.
Pour a cup or two of bleach or vinegar down the home drain 
and let it sit for 24 hours before running another cycle.
This will help eliminate odor from the home drain. 
If a cycle is started too soon after doing this, it will not help the issue.

Connect the power plug to the wall outlet.

Avoid connecting several electric devices, 
it may be the cause of a fire.

about 100 cm

about 145 cm

about 105 cm

Laundry tub

Max. 100cm

min. 60cm

Max. 100cm

min. 60cm

Retainer

Tie

strap

Hose

min. 60 cm

max. 100 cm

Rubber Cup

Check the horizontality with a level (Gage).

8

If washing machine legs are loose or not Screwed in, then 

with the spanner wrench. 

Using the level, level the washing machine from front to back and side to side.

Use the spanner wrench to adjust Legs until level and try the 

.

Perform a Rinse and Spin with some clothing in the machine.

To do this, put 2~3kg of clothing in the unit, turn on the unit, Select the Rinse+Spin 
and then start. When the unit reaches the spin cycle, watch for vibrations.
If the unit is vibrating, make small adjustments to the leg until they subside. (Repeat step 2)

the lock nut against the base of the machine to 

the 

.

Lower the foot until there is no gap between floor and foot.
And only use 

when difference at the leg adjustment is more than 

.

Place your right hand on the back, right corner and your left hand on the front,
left corner of the unit, then attempt to rock the unit from corner to corner.
Then, move your right hand to the front, right side and your left hand to the
back, left corner and attempt to rock the unit from corner to corner.

If the unit is level, it will not rock.  However, if the unit is not level, it will rock.
If the unit rocks, it will be necessary to adjust the leveling feet of the unit.
Adjust the foot under the hand that is on the front of the machine.

A level

Higher

Tighten

Adjustable feet

Tighten

Adjustable feet

Higher

Tighten

Adjustable feet

Lower

4620ER4002B
(Gray)

for Wooden floors

Rubber Cup

4620ER4002A
(Black)

for Tile floors

Lock nut

10mm

Adjustable bolt

Tighen the lock nut

Floor

No Gap

Floor

No Gap

Floor

Gap

Use this button to turn the

power  .

Rotate the  

 to select the cycle

designed for different

types of fabric and soil

levels.

Time Delay : Allows the start of any cycle to be delayed

for 3~19 hours.

Favorite : Favorite program allows you to store a

customized wash cycle for future use.

Pre Wash : Use

this option for load that needs protreatment.

Adds 17minutes pre wash and drain.

Additional programs

Cycle Selector

POWER

Option Button

Medic Rinse : For best results or for cleaner rinsing, you

can choose Medic Rinse option.

Intensive : If the laundry is heavily Soiled, “Intensive” option is effective.

Time Save : This option can be used to reduce the time of a wash program.

To use this option press option button before wash program is started.

Rinse+ : Used to additional rinse, which may assist in removing

traces of detergent residue.

Rinse Hold : -Rinse Hold is selected by pressing the spin button

repeatedly this function leaves clothes in the machine; suspended in

the water after the last rinse without entering into spin.

- To proceed through to a drain or spin.once the rinse hold function is

completed using to Program dial and Spin button to the required program.

(Spin)

Use this button to Start/

Stop the washer.

Start/Pause

T

a

si

5. OPERATION

This display shows:

In case of abormal operation, error

indications are displayed.

(

)

See troubleshooting

a) the estimated time remaining in the

cycle when operating.

EST. Time  remaining

Tub Clean course can be set by

Holding rinse +temp button
Tub Clean is a special cycle to

clean the inside of the washer.

Tub Clean

Dry Selector knob

Dry programs selected by rotating

dry knob.
[Lower Temp. - Iron Dry - Cupboard

Dry - Eco Dry - Time(30,60,120)]

can be selected.

he Beep on/off function can be set by pressing

nd holding the Option and Spin button

multaneouly.

Use this option to prevent unwanted

use of the washer. Press and hold

Option left and right button

for 3 seconds to lock/unlock control.

When Child lock is set, CHILD LOCK

lights and all buttons are disabled

except the Power

button. You can

lock the washer while it is operating.

Child Lock

Spin, Temp. Button

To change the spin speed,

Press the Spin button to cycle

through available options.
Select a water termperature

based on the type of load you

are washing.