LG WD14030RD6 Service Manual ▷ View online
53
• V ~ U (8~11Ω)
• U ~ W (8~11Ω)
• W ~ V (8~11Ω)
• U ~ W (8~11Ω)
• W ~ V (8~11Ω)
Motor Stator
U V W
Hall Sensor
Ha
Hb
Common
• Common ~ Ha (5~15kΩ)
• Common ~ Hb (5~15kΩ)
• Common ~ Hb (5~15kΩ)
1 Remove the back cover.
2 After loosening the bolt, Rotor, pull out the
rotor.
1 Remove the 6 bolts from the stator.
2 Disconnect the 2 connectors.
2 Disconnect the 2 connectors.
1 Remove the hinges (Damper) at the Tub.
3 The hinge at the base is pulled off.
(In directions of the arrow)
2 The Hinge(Damper) at the base is pulled off by
pressing on the snaps at the sharp end.
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
54
1 Disassembly Top Plate, Control Panel
Assembly, Drawer Panel Assembly,
Cabinet Cover Assembly, Lower Cover
Assembly.
Cabinet Cover Assembly, Lower Cover
Assembly.
2 Unscrew the screws from the Side
cover(Left).
3 Lift and separate the Side(Left) cabinet cover.
4 Remove pump outlet hose.
5 Remove tub pump bellows.
6 Remove cap(Remaining Hose).
7 Disconnect the wiring.
8 Three screws are unscrewed from the cabinet.
9 Remove the pump to arrow direction.
• Rating : 220/240V 50Hz
• Resistant : 162~176Ω
• Resistant : 162~176Ω
1 Loosen the nut.
2 Remove washing heater by pulling out.
2 Remove washing heater by pulling out.
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub
and check the position of wire color.
the heater to heater clip on the bottom of tub
and check the position of wire color.
PUMP
HEATER
< Heater for Washing>
• Rating : 230V 2000W
• Resistant : 24.5~28.5Ω
• Rating : 230V 2000W
• Resistant : 24.5~28.5Ω
CAUTION
Bellows
Pump
Hose
Circulation
Hose
Hose
Remaining
Hose
55
1 Remove washing heater.
2 Remove the foreign object(wire,coin,etc) by
2 Remove the foreign object(wire,coin,etc) by
inserting long bar in the hole.
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
1 Disassembly lower cover assembly.
2 Disassembly MAIN PWB ASSEMBLY
3 Disconnect the wiring connector.
Fist, Press hook and turn the safety switch
assembly switch assembly safety.
assembly switch assembly safety.
4 Unscrew one screw from the base.
SWITCH ASSEMBLY, SAFETY
2
1
47
10. EXPLODED VIEW AND PART LIST
10-1. THE PART LIST OF CABINET ASSEMBLY
A141
A150
A131
A130
A440
A134
A133
A303
A300
A310
A140
A154
A153
A103
A102
A110
A101
A100
A430
A410
A455
A450
A135
A200
A201
A220
A152
A151
A104
A276
A485
Click on the first or last page to see other WD14030RD6 service manuals if exist.