LG WD1351RD / WD1357RD Service Manual ▷ View online
6
2-5. THE DOOR CAN NOT BE OPENED
2-8. WATER CIRCULATION
2-7. CHILD LOCK
2-6. DOOR LOCKED LAMP LIGHTS
When Washing and Rinsing function of shower at the upper part of Gasket.
When Washing, it continuously operates for 3 minutes and intermittently.
When Rinsing, it continuously operates after completion of water supply.
When Washing, it continuously operates for 3 minutes and intermittently.
When Rinsing, it continuously operates after completion of water supply.
While program is operating
When a power failed and power plug is taken out in operation
While Door Lock lights turn on.
While the motor is in the process of intertial rotating, through the operation is paused.
When a power failed and power plug is taken out in operation
While Door Lock lights turn on.
While the motor is in the process of intertial rotating, through the operation is paused.
When the frequency of water level is lower than 22.9 kHz
(It can be canceled when the frequency is more than 23.8 kHz)
When the temperature inside the tub is higher than 45 °∆C and water level is not 25.5 kHz.
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40°C)
(It can be canceled when the frequency is more than 23.8 kHz)
When the temperature inside the tub is higher than 45 °∆C and water level is not 25.5 kHz.
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40°C)
Use this option to prevent unwanted use of the washer. Press and hold the Wash and Rinse button for 3
seconds to lock/unlock control.
When Child lock is set, CHILD LOCK lights and all buttons are disabled except the Power button.
You can lock the washer while it is operating.
seconds to lock/unlock control.
When Child lock is set, CHILD LOCK lights and all buttons are disabled except the Power button.
You can lock the washer while it is operating.
FOR LG TECHNICIAN
7
3. PARTS IDENTIFICATION
Shipping Bolts
Drain Hose
Dispenser
Inlet Hose
Drum
Door
Lower Cover Cap
Drain Plug
Adjustable Feet
Drain Pump Filter
Power Plug
Control Panel
Spanner
Inlet hose (2EA)
Accessorios
If the supply cord is damaged,
it must be replaced by the
manufacturer or its authorized
service technician in order to
avoid a hazard.
it must be replaced by the
manufacturer or its authorized
service technician in order to
avoid a hazard.
FOR LG TECHNICIAN
8
4. INSTALLATION
Before servicing ask troubles of customers.
Check the adjustment(power supply is 127V ac 60Hz, remove the transit bolts....).
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly instructions.
And then, service and repair.
After servicing, operate the appliance whether it works OK or NOT.
Remove the transit bolts
(4EA:
)with supplied spanner.
Keep the transit bolts and
spanner for future use.
Insert the 4 caps
provided into the hole.
Turn clockwise to raise;
counterclockwise to lower.
Turn the leveling feet to adjust the
appliance.
STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE TRANSIT
BOLTS
INSTALL THE APPLIANCE
ON FLAT AND FIRM SURFACE
ADJUST THE
LEVELING
1
2
Favorite
Sanitar
y
FOR LG TECHNICIAN
9
HOW TO CONNECT THE INLET HOSE
• Verify that the rubber washer is inside of the
valve connector.
• Tighten the inlet hose securely to prevent leaks.
The end of the drain hose should be placed less than 100 cm from the floor.
CONNECT THE DRAIN HOSE
CONNECT POWER PLUG
Make sure that the hose is not twisted.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices, as
doing so may cause a fire.
Avoid submerging the end of the hose.
Cold
FOR LG TECHNICIAN
Click on the first or last page to see other WD1351RD / WD1357RD service manuals if exist.