LG WD12580D6 / WD12595D6 Service Manual ▷ View online
8
4. INSTALLATION & TEST
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 220-240V AC, remove the transit bolts....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
· Remove the 4 shipping bolts
with the supplied wrench.
※Do first lower side to remove easily.
·Keep the shipping bolts and
spanner for future use.
·Insert the 4 caps
(provided) into the hole.
·Turn clockwise to raise;
counterclockwise to lower.
·Turn the leveling feet to adjust
the appliance.
STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE SHIPPING
BOLTS
INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
ADJUST THE
LEVELING
Lower
Keeping
Higher
9
HOW TO CONNECT THE INLET HOSE
• Verify that the rubber washer is inside of the
valve connector.
• Tighten the inlet hose securely to prevent leaks.
※ The end of the drain hose should be placed less than 100 cm from the floor.
CONNECT THE DRAIN HOSE
CONNECT POWER PLUG
· Make sure that the hose is not twisted.
· Connect the power plug to the wall outlet.
·Avoid connecting several electric devices, as
doing so may cause a fire.
· Avoid submerging the end of the hose.
Cold
10
Preparation for
washing.
washing.
Press the POWER button.
Press the Start/Pause
button.
button.
·Connect the power plug to
the outlet.
·Connect the inlet hose.
·Press the WASH/RINSE button
and the present temperature will
be displayed.
be displayed.
·Check if the drum rotates
clockwise and counterclockwise.
Check the water heating
function.
function.
Check the automatic
reverse rotation.
reverse rotation.
·Check if water is supplied
through the detergent dispenser.
Check the water supply.
·If SERVICE is needed during
check, remove the remaining
water by pulling out the hose cap.
Water removal.
·Listen for a click to determine
if the door is unlocking.
Press the
START/PAUSE button.
START/PAUSE button.
·Power off and the power on.
·Press the SPIN SPEED button
·Press the START/PAUSE button.
·Check the spin and drain
·Press the SPIN SPEED button
·Press the START/PAUSE button.
·Check the spin and drain
functions.
Check the drain and spin
functions.
functions.
·Listen for a click to determine if
the door has locked.
TEST OPERATION
11
11
6. WIRING DIAGRAM / PROGRAM CHART
Click on the first or last page to see other WD12580D6 / WD12595D6 service manuals if exist.