DOWNLOAD LG WD12580D6 / WD12595D6 Service Manual ↓ Size: 7.01 MB | Pages: 43 in PDF or view online for FREE

2-2. NEURO FUZZY WASHING TIME OPTIMIZATION

To get the best washing performance, optimal time is determined by the water temperature,
the selected washing temperature, and the size of the load.

2-3. WATER LEVEL CONTROL

This model incorporates a pressure sensor which can sense the water level in the tub.
The water supply is stopped when the water level reaches the preset level, the washing
program then proceeds.
Spinning does not proceed until the water in the tub drains to a certain level.

washing time

rinsing time

the best
washing
performance

spin rhythm, time

SENSING

EFFECT

PROCESSING

DETERMINATION

2-4. DOOR CONTROL

The door can be opened by pulling the door handle whenever washer is not in operation.
When the cycle is completed, the DOOR LOCKED light will turn off.
If a power failure has occurred while in operation, the door will unlock after 5 minutes.
Clicking sounds can be heard when the door is locked/unlocked.

2-5. THE DOOR CAN NOT BE OPENED

2-8. WATER CIRCULATION

2-7. CHILD LOCK

2-6. DOOR LOCKED LAMP LIGHTS

The recirculated water sprays from a nozzle at the top of the door gasket.
During the wash cycle, it runs continuously for the first three minutes and intermittently after that.
During the rinse cycle, it runs continuously after the drum is filled.

While program is operating.
During a power failure or if the machine is unplugged while running.
While door Lock lights turn on.
Wile the drum is still turning, even if the machine has been stopped or paused.

When the frequency of water level is lower than 22.9 kHz.
(It can be canceled when the frequency is more than 23.8 kHz.)
When the temperature inside the tub is higher than 45°C (113°F) and water level is not 25.5 kHz.
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40°C (104°F))

Use this option to prevent unwanted use of the washer. Press and hold STAIN CARE button for 3
seconds to lock/unlock control.
When child lock is set, CHILD LOCK lights and all buttons are disabled except the POWER
button. You can lock the controls of the washer while washing.
CHILD LOCK remains in effect after the cycle and even if the power is turned off. To UNLOCK,
press and hold the STAIN CARE button for 3 seconds.

2-9. STEAM

For tough stained clothes, sick room linens, or baby clothes.
Steam Wash is available with Sanitary, Bulk/Large, Perm. Press, Cotton/Normal, and Baby Wear cycles.
This option features upgraded washing performance with low energy and water consumption.
Do not load delicates such as wool, silk, and easily discolored clothes.

3. PARTS IDENTIFICATION

Cold
Water Hose

Wrench

(for removing

shipping bolts and

adjusting leveling feet)

Elbow Bracket
(for securing
drain hose)

Back of Washer

Included Accessorios

If the supply cord is damaged,
it must be replaced by the
manufacturer or its authorized
service technician in order to
avoid a hazard.

4. INSTALLATION & TEST

Before servicing, ask the customer what the trouble is.

Check the setup (power supply is 220-240V AC, remove the transit bolts....).

Check with the troubleshooting guide.

Plan your service method by referring to the disassembly instructions.

Service the unit.

After servicing, operate the appliance to see whether it functions correctly.

· Remove the 4 shipping bolts

with the supplied wrench.

※Do first lower side to remove easily.

·Keep the shipping bolts and

spanner for future use.

·Insert the 4 caps

(provided) into the hole.

·Turn clockwise to raise;

counterclockwise to lower.

·Turn the leveling feet to adjust

the appliance.

The appliance should be installed as follows: