LG WD12570FD / WD12576FD Service Manual ▷ View online
1⃞ Before servicing ask troubles of customers
2⃞ Check the adjustment(power supply is 220-240V~, remove the transit bolts....)
3⃞ Check the troubles referring to the trouble shooting.
4⃞ Decide service steps referring to disassembly instructions.
5⃞ And then, service and repair.
6⃞ After servicing, operate the appliance whether it works O·K or NOT.
2⃞ Check the adjustment(power supply is 220-240V~, remove the transit bolts....)
3⃞ Check the troubles referring to the trouble shooting.
4⃞ Decide service steps referring to disassembly instructions.
5⃞ And then, service and repair.
6⃞ After servicing, operate the appliance whether it works O·K or NOT.
■ STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT
INSTALL THE APPLIANCE
ADJUST THE
BOLTS
ON FLAT AND FIRM SURFACE
LEVELING
Remove the transit bolts
(4EA:
①)with supplied spanner.
Keep the transit bolts and
spanner for future use.
Insert the 4 caps
provided into the hole
4. INSTALLATION
8
1
2
Turn the leveling feet to adjust the
appliance.
Turn clockwise to raise;
counterclockwise to lower.
Favorite
Sanitary
■ HOW TO CONNECT INLET HOSE
Check that the rubber packing is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
■ CONNECT DRAIN HOSE
■ CONNECT POWER PLUG
9
· Make sure that the hose is not twisted.
※ The drain hose should be placed under 100cm from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices,
It may be the cause of the fire.
· Avoid submerging the end of the hose.
Favorite
Sanitary
Favorite
Sanitary
Favorite
Sanitary
TEST OPERATION
10
Favorite
Sanitary
Favorite
Sanitary
Favorite
Sanitary
SOFTENER
MAX
Connect the power plug to
the outlet.
In case of Coloreds program.
Connect the inlet hose.
Preparation for
Press the POWER button.
Press the Start/Pause
washing.
button.
·Press the Temp. button
·Check if the drum rotates
·Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
·Power off and then power on.
·Check if the door can be
·Check if the door can be
opened after 3 minutes.
·Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
and start the machine again.
·Check drain and spin.
·If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
11
6. WIRING DIAGRAM
/
PROGRAM CHART
Drain
I
⁄
S
Heat
Steam
Wash
Drain
I
⁄
S
Drain
I
⁄
S
Drain
I
⁄
S
Drain
I
⁄
S
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
90 8"30 60 300 120 (12)" (20)" (42)" 60 300 120 180 60 300 120 180 60 300 120 180 60 300 120 180 60 480 180 20
20
13
**Approx
Working
Time
(Minute)
32
20
181
58
58
57
80
30
E
N
D
D
A
U
U
T
O
O
F
F
F
129
93
Rinse
Spin
Drain
Spin
D
⁄
T
Extra &
Stain(4~6)
W
⁄
S
Rinse
3
W
⁄
S
Rinse
2
W
⁄
S
Rinse
Wash
1
W
⁄
S
Rinse
Wash
Pre
Main
W
⁄
S
Wash
W
⁄
S
Baby Care
Wash
Spin
Duvet
Quick 30
Rinse+Spin
Refresh
Cotton
Synthetic
Delicate
Wool/Silk
57
Hand Wash
Heat
Click on the first or last page to see other WD12570FD / WD12576FD service manuals if exist.