LG WD-R1112 Service Manual ▷ View online
8
■ HOW TO CONNECT THE INLET HOSE
Verify that the rubber washer is inside of the
valve connector.
Tighten the inlet hose securely to prevent leaks.
■ CONNECT THE DRAIN HOSE
■ CONNECT POWER PLUG
※ The end of the drain hose should be placed less than 96” from the floor.
· Connect the power plug to the wall outlet.
·Washer should be connected to dedicated
circuit.
· Make sure that the hose is not twisted.
· Avoid submerging the end of the hose.
9
MAXMAX
M
A
X
A
X
Connect the power plug to
the outlet.
Connect the inlet hose.
Preparation
Press the POWER button.
Press the Start/Pause
for washing.
button.
·Press the Wash/Rinse button
·Check if the drum rotates
·Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
·Power off.
·Check if the door can be
·Check if the door can be
opened after 3 minutes.
• Power off and power on.
• Press the Spin Speed button.
• Press the Start/Pause button.
• Check the spin and drain
• Press the Spin Speed button.
• Press the Start/Pause button.
• Check the spin and drain
functions.
·If SVC is needed, remove the
remaining water by pulling out
the hose and removing the
cap.
the hose and removing the
cap.
Check the water heating
Check automatic reverse
Check the water supply.
function.
rotation.
Check drain and spin
Power off and open the
Water removal
functions.
door
TEST OPERATION
10
5. OPERATION
• Use this button to turn the power
On/Off.
• Rotate the Cycle selector
knob to select the cycle
designed for different
types of fabric and soil
levels.
designed for different
types of fabric and soil
levels.
• Use this option to pre
Press and hold Dela
lock/unlock control.
lock/unlock control.
• When Child lock is s
are disabled except t
the washer while it is
the washer while it is
• Soak: Use this option to wash normal clothes or thick and heavy
clothes which are excessively dirty.
• Extra Wash: If the laundry is heavily soiled, this option is effective.
• Rinse+Spin: Use this option to rinse and then spin.
• Spin Only: Use this option to select spin cycle only.
• Dry Only: When you want Dry only, select this option.
• Use this button to Start/
Stop the washer.
• This display shows:
a) the estimated time remaining in the
cycle when operating.
b) an error code when an error has been
detected.
11
• Extra Rinse
• DRY Button
• Wash/Rinse, Spin Speed,
Soil Level Button
Soil Level Button
• Delay Wash
o prevent unwanted use of the washer.
elay Wash button for 3 seconds to
ol.
s set, Child Lock lights and all buttons
ept the Power button. You can lock
it is operating.
• This option provides an
additional rinse cycle.
• Use this option to ensure
the removal of detergent
or bleach residue from
garments.
or bleach residue from
garments.
• Allows the start of any cycle to
be delayed for 1~19 hours.
• Select a water temperature based on the type of
load you are washing.
• To change the spin speed, press the Spin Speed
button repeatedly to cycle through available
options.
options.
• To change the soil level, press the Soil Level
button repeatedly until the desired setting is on.
• These lights show which portion
of the cycle the washer is
operating.
operating.
• Dry programs selected by pressing the Dry button.
• By pressing the button [Normal – More – Time –
Off – Low Temp. – Less] can be selected.
Click on the first or last page to see other WD-R1112 service manuals if exist.